4-20mA Explosion-Proof Integrated Ultrasonic Level Gauge Sensor Level Meter

Min.Order: 1
Product origin: Xi'an, Shaanxi, China
Infringement complaint: complaintComplaint
US$ 49 ~ 199

Description
Product Description

The main performance characteristics:

The ultrasonic level meter is a universal level meter that draws on the strengths of many level meters at home and abroad. It is a general-purpose level meter with a fully digital and humanized design concept, with perfect level measurement and control, data transmission and human-machine communication functions. The ultrasonic level meter adopts modular circuit design and High quality multi-layer PCB board, with a tight hardware structure and reasonable layout. The product supports isolated 4-20mA, HART output, built-in GPRS, LORA, GPS, RF, Bluetooth and other wireless data transmission, but also according to customer needs to add modules to achieve other functions.The ultrasonic level meter adopts imported industrial grade chips, digital temperature compensation, etc...related special integrated circuits. With strong anti-interference, can be set arbitrarily upper and lower limit nodes and online output adjustment, and with a field display, the shell using engineering plastic ABS waterproof shell, the shell is small and quite strong. The ultrasonic level meter can meet most of the liquid level and material level measurement requirements without contacting industrial media, completely solving the shortcomings of pressure type, capacitor type, float type and other traditional measurement methods such as entanglement, blockage, leakage, media corrosion and maintenance inconvenience.
 
Therefore, it can be widely used in various fields related to material level and liquid level measurement and control.
Product Parameters
Product name
ultrasonic level meter
POWER SUPPLY
18-28VDC (2-wire), 12-24VDC, 220VAC, internal battery power
Output Signal
4 to 20mA RL>600Ω (standard), HART (2-wire system), 1 to 5V\1 to 10V , RS485 (optional Bluetooth conversion accessory)
range
5, 8, 10, 12, 15, 20, 25, 30, 35, 40m (optional when ordering) Blind spot:
Display
OLED Chinese and English menus (with self illumination) Minimum display resolution: 1mm
Operating frequency
20 to 350 KHz
Instrument material
ABS engineering plastic, PP
Dimension
Φ92mm×198mm×M60,Φ92mm×270mm×DN80
Electrical interface
M20X1.5(two sets)
Installation interface
M60X2 or ¢61MM round hole (with large nut), DN80 non-standard flange
Into the cable
inside the terminal user to determine the working environment: room temperature, atmospheric pressure
 

 

For More Information,Please Contact Our Advisor Online!

Product Display


Why Choose Us

You will benefit from Our pressure transmitter ?

 

Feature

Advantage

Benefit

It offers process connection ,electronical connection range accuracy options

all the standard industry output signals, the most common international process connections and a wide number of electrical connections

it can be suited to the widest range of applications.

 lightning  surge reverse protection

short-circuit conditions to protect prevent reverse connection; Instant voltage overload protection

running reliable and longlasting in harsh condition

The vent with a filter

breath atmospher and protect moisture enter transducer

without maintenance, even in the most humid environments.

USA TE Chip,Digital PCB board

High accuracy 0.25%,Small temperature drift,automatically compensates for changes in barometric pressure

Stability,keep sensor running longer by reducing downtime and maintenance costs

Lowe-Power output signals

Low-power output signals for battery-operated or solar measuring systems available ,lowest power supply is 3.3V

energy-saving and environmental protection

316L diaphragm

Anti-corrision ,wear resistance , shock resistance

make it suitable for immersion for a long time in most industrial liquids

Suction water  filter design

8 pore design Anti-blocking  Prevent plugging rate increases more than 80%

Simple maintenance ,easy to cleaning and installation



Precautions

1 When the pressure transducer is in danger of being submerged or submerged, please order the IP68 type pressure sensor with liquid level sensor outlet type, or consult.

2 The pressure transducer port thread of the flat membrane pressure sensor is limited to M20 × 1.5 or G1 / 2,3/4" Tri-
clamp, if you need other special threads, please feel free consult us .

3 When pressure sensor range is in the range of - 5 ~ 5kpa, the sensor uses a non-isolated silicon piezoresistive pressure chip, and the product can only measure non-corrosive gases,please consult us for more information.

4 When testing media has high temperature, please choosing our high-temperature pressure sensor, the radiator needed well ventilated,
We can make sensor 175ºC- 230ºC for special use ,please consult us or pressure sensor 

5 Gauge pressure sensor  with a range less than 450PSI are equipped with vents or vent cables to prevent the vents from being blocked, please sonsult us!

Company Profile

 

FAQ

 

1.Q: How long is the delivery?
-- Mostly within 10days

2.Q:Can I get a sample?
-- Sure, contact our sales please

 
3.Q:What is your MOQ?
-- 1pcs

 
4.Q: How about warranty time?
-- 12-18months

 
5.Q: How can I visit your factory?
-- Fly to Xi'an air port, it's our pleasure to pick you up.

 
6.Q:How do you control your quality ?
-- We have EPR system .we control from parts, process, testing, packing ,retesting.
 
7.Q: Do you have test report for each product?
-- Yes,we have test report for each product.
 
8.Q: Can you customize product for us according to our required specifications?
-- Yes,we are OEM manufacturer,we could customize products according to your required specifications.
 
Every Sensor will be tested two times before reach you, after that sport test for the third time. Make sure about the quantity.Welcome to order our products



Product Tag:
Related categories:
Scroll to Top