High Pressure Screw Air Compressor for Fiber Laser Cutting Application
1. All-in-one design, user-friendly, it can be used when power is ready.
2.The original imported airend is used to ensure high ekciency and stability, and smoother cutting.
3. Multiple protection devices, multiple shock and noise reduction configurations, low noise.
4. High-efficiency refrigerant dryer and 5-level high-ekciency special precision Filter, high Filtration accuracy, pressure dew point as low as 2~5°C, gas oil content as low as 0.001PPM, particulate matter filtration accuracy up to 0.01um, ensuring pure compression air.
5. Constant temperature control. The start and stop of the cooling fan can be set according to the season for the better control on oil temperature to avoid emulsification.
6. The 500L large air storage tank has buuered air and stable air supply. The precipitation of compressed air in the air storage tank is more conducive to water removal and sewage discharge.
7. Centralized drainage after post-treatment is helpful to keep the customer's site clean.
Our advantages
Germany Rotorcomp Air end
1.Original imported rotorcomp air end to ensure high efficiency and stability, smoother cutting and smoother cut surface.
2.Level 1 energy efficiency standards.
High efficiency motor
1. IE3, IIP23/P55 high protection level.
2. Suitable for environments with more dust and smoke.
3. Dust and moisture in the air are not easy to enter the motor,maintaining long-term trouble-free operation.
Manuli Italy Super Pipe
1. Anti-aging, Long service life.
2. High Polymer Material, High Intensity.
3. Multi-working-condition
High efficiency inlet filter
Original Donaldson, with a filtration accuracy of 2um. Ensure that the air sucked by the air end is pure and free of impurities
Mann Filters Set
1.Air Filter, Purified Air from Very Beginning.
2. Oil Filter, Clean Oil Circulation.
3. Oil Separator, Purify Compressed Air.
4. 150% Filtration by Serial Filter Paper Design
Microcomputer PLC control
Display air compressor operating status, fault alarm,parameter settings, temperature and pressure, total operating time and loading operating time, loading/unloading/full load display, emergency shutdown, operation mode, etc. And can record at least 30 historical alarm information, exhaust pressure, temperature and other historical information, automatically load and unload, realize unmanned operation.
Built-in refrigerated dryer, reasonable design
Environmentally friendly refrigerant, no pollution risk.
Efficient water removal and filtration.
Ultra-precision filter, multiple protection
1.Remove Moisture from Compressed Air.
2.Remove Dust, Particle Content ≤0.01μm.
3.Remove Oil, Oil Content ≤0.003ppm.
4.Outlet Lens Spray Test, No Fog, nor Impurities.
Model | Air Delivery (m3/min) | Rated exhaust pressure (Mpa) | Power (kW) | Noise (Db) | Outlet diameter (In) | Dimension (mm) | Weight (Kg) | Exhaust pressure dew point (ºC) | Exhaust dust content (μm) | Exhaust oil content (ppm) | Gas storage tank capacity (L) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
DBZY-10A | 0.55 | 1.58 | 7.5 | 65 | G3/4 | 1418*700*1500 | 395 | 2~10 | 0.01 | 0.01 | 260 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
DBZY-15A | 1.05 | 1.58 | 11 | 65 | G3/4 | 1882*790*1731 | 560 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
DBZY-20A | 1.51 | 1.58 | 15 | 65 | G3/4 | 1882*790*1731 | 572 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
DMZY-15A | 1.05 | 1.58 | 11 | 65 | G3/4 | 1882*790*1731 | 560 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
DMZY-20A | 1.52 | 1.58 | 15 | 65 | G3/4 | 1882*790*1731 | 572 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
DMZY-30A | 2.41 | 1.58 | 22 | 68 | G3/4 | 1882*1081*1801 | 630 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
DCZY-30A | 2.21 | 1.58 | 22 | 68 | G3/4 | 1882*1081*1801 | 630 | 2~10 | 0.01 | 0.01 | 500 |
Description | Model | Dimension (mm) | Weight (kg) | Connection size |
15kw fixed speed compressor+500L tank+dryer+ line filters | DBZY20A (15.8bar/15KW/1.51m³/500L) | 1882*790*1731 | 572 | G3/4" |
22kw fixed speed compressor+500L tank+dryer+line filters | DCZY30A (15.8bar/22KW/2.41m³/500L) | 2560*1081*1801 | 903 | G3/4" |
22kw fixed speed compressor+1100L tank+dryer +line filters+Adsorption dryer | DCZY30AC (15.8bar/22KW/2.41m³/1100L) | 2560*1081*1801 The final size is according to the actual installation | 1103 | G3/4" |
15kw piston compressor+600L tank+dryer+line filters | DHH1230 (30bar/15KW/1.2m³/600L) | 1650*1500*1970 | 1300 | G3/4" |
22kw piston compressor+600L tank+dryer+line filters | DHH2530 (30bar/22KW/2.5m³/600L) | 2200*1600*1970 | 1520 | G3/4" |
Laser machine power | Low power section | High power section | |
1000-6000W | 6000-8000W | 8000-20000W | |
Compressor model | DBZY-20A | DCZY-30A | DCZY-30AC |
Main tech parameters | Pressure:15.8bar 1.58mpa Capacity: 1.51 m3/min Power: 15kw | Pressure: 15.8bar 1.58mpa Capacity: 2.41m3/min Power: 22kw | Pressure: 15.8bar 1.58mpa Capacity: 2.41m3/min Power: 22kw |
Main components | 1. 20hp 15kw screw compressor 2. Refrigerated dryer 3. 500 liters gas tank 4. 1 pcs gas-water separator 5. 4 pcs high-precision filters 6. Automatic drainage valve | 1. 30hp 22kw screw compressor 2. Refrigerated dryer 3. 500 liters storage tank 4. 1 pcs gas-water separator 5. 4 pcs high-precision filters 6. Automatic drainage valve | 1. 30hp 22kw screw compressor 2. Refrigerated dryer 3. 500 liters storage tank 4. 1 pcs gas-water separator 5. 4 pcs high-precision filters 6. Adsorption dryer 7. Automatic drainage valve 8. 600 liters storage tank |
Compressed air quality | Particle content: <=0.01um Oil content: <=0.003 ppm Pressure dew point: 2-8 ºC | Particle content: <=0.01um Oil content: <=0.003 ppm Pressure dew point: 2-8 ºC | Particle content: <=0.01um Oil content: <=0.003 ppm Pressure dew point: -40~ -70 ºC |
• Packing Details: Plywood crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary screw air compressor)
Dehaha Compressor Jiangsu Co.,Ltd.was founded in 1996 with over 150 skilled employees and more than 25 R&D engineersteams ' .We focus on the research & develop,manufacture and energy-saving solutions of screw air compressor to create value for customers and society.In 2018 our total sales volume approached 15 million US dollars.By over 23 years enhanced experiences of designing, producing and marketing,today our valued customers are over 130 countries.
Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents.
Dehaha's primary businesses focus in following key areas:
Oil-injected rotary screw compressors
Portable screw air compressors
Oil free air compressors
High pressure air compressors
Air treatment equipment
At Dehaha,we earn our customers' trust and satisfaction by manufacturing the superior quality compressed air products for all industries.All of our products are designed for reliable performance,easy maintenance,and maximum energy efficiency.We have sales representatives who can speak English,Spanish,French,and Russian which makes it easier for our clients from all over the world to interact and negotiate with us.
Dehaha continuously innovates product development and management to meet customers' demand.The powerful enterprise culture and continuous innovation make Dehaha improved rapidly to reach the business principle"Energy Saving First, Mutual Value Shared". Dehaha mission is to be a world-renowned high-end brand,with sustainable development,constantly improving its own value and sharing it with our customers and staff.Committed to offer our customers a silent and energy-saving manufactured products.
1.24/7 after sales service support in different languages.
2.Follow up the feedback of products in 2 months interval by email or call.Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of Jiangsu, China, more than 24 years.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What's payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.Worldwide agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and two years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer's market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1.The raw materials are strictly inspected
2. Some key parts are imported from overseas
3.Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.