I. Product parameters:
7. Input voltage: 115/230VAC, 50/60Hz;
8. Output voltage: VDC (0-100%)* input value;
9. Output current: 10AMAX;
10. Control mode: potentiometer or 0-10V (isolation required);
11. Speed regulation ratio: 50: 1;
12. Soft start time: 0.2S-5S;
13. Working environment: ≤80%RH, no condensation,-10 ~ 60;
14. The weight is about 0.5kg;
15. Suitable for permanent magnet and separately excited DC brush motor with driving power not more than 1500W;
L1 and L2 are AC input terminals, and the input voltage level is 115 / 230VAC;
I1 and I2 are start stop signal terminals, and I2 is the low end. When disconnected, the motor runs, and when connected, the motor stops;
P3 p2 p1 is the external potentiometer terminal, P3 is the signal power supply, P2 is the signal input end, P1 is the low end of the signal, when using the external signal 0-10V control, F - and P2 can be used as the input end, and the input signal is an isolation signal;
F + F - is the motor excitation terminal, and the maximum current is 1a,