Description
Rotary dryers are used to dry small, powdery or granular wet materials such as wood chips, sawdust, sand, mineral dust, agricultural waste, etc. The raw material is transported by the scraper conveyor to the inside of the rotary dryer.and the front is equipped with a hot blast stove.
The generated hot air enters the dryer by the fire separating device, and the material is dispersed by the low-speed rotation and bending plate.so that the high-temperature airflow passes through the material and make heat exchange, the rotary dryer has a certain angle of inclination, and sufficient air volume to drive the material forward.Finally, the dried material is discharged from the discharge port.
Sawdust dryer are widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves and other fiber materials.
According to your raw materials, we also provide three-layer rotary drum dryer, three-layer rotary drum dryer which can improve the internal structure of the original single drum dryer, increase the pre-drying of wet materials before entering the machine and prolong the drying time of wet materials in the machine, Coupled with sealing, heat preservation and reasonable supporting measures, the production capacity of the dryer is increased by 48-80% compared with the original single cylinder dryer, the evaporation intensity per unit volume can reach 120-180kg/m3, and the standard coal consumption is only 6-8kg/t. Moreover, it effectively reduces the occupied area, and the smaller volume is convenient for sea transportation.
Temperature measurement sensors and digital display instruments are installed at the high and low-temperature pipelines of the drying system to achieve the best drying effect and ensure the safe operation of the system.
It can be equipped with a mechanical chain coal-fired hot blast stove, which has strong adaptability to coal types, and the overall thermal efficiency can reach more than 80%. The average coal consumption per ton of precipitation is not more than 176kg of standard coal.
This machine also have gas cleaning system. With cyclone, air fan, wet dust filter. Without pollution.
The drum body adopts screw + plate structure, double-layer plate and turnover plate are continuously turned up and down to make the material fully touch with the hot air, promote the heat exchange, ensure the drying efficiency.
Structural drawing of dryer
We will provide you with professional and detailed 3D drawings and production plans after receiving your inquiry.
4-5t/h wood waste drying pellet plant
Capacity:4-5t/h Pellet size:6/8mm pellet Main machine:Wood chipper,hammer mill,wood drying plant,wood pellet mill,cooling machine and packing machine Delivery time:40-50 working days Production line:Morroco
2-3t/h wood waste drying pellet plant
Capacity:2-3t/h Pellet size:8/10mm pellet Main machine:Wood chipper,hammer mill,wood drying plant,wood pellet mill,cooling machine and packing machine Delivery time:35 working days Production line:Russia
Zhangsheng dryer production line has been exported to more than 80 countries and has 300 foreign partners, such as Germany, Britain, the United States, Italy, Israel, Chile, Russia, Vietnam, India, Cambodia, Indonesia, Malaysia, Thailand, etc
Packed in high quality metal frame, with board on the bottom for support and extra plastic wrap for protection.Ensure that the machine is delivered to you intact and without damage, and start production immediately.
Henan Zhangsheng Environmental Protection Equipment Co., Ltd. was established in 2005, and has passed ISO and CE certification. The products have been widely exported to more than 60 countries and have been well received by customers. As a professional supplier of wood pellet mills and whole plant project solutions, Zhang Sheng can always meet the needs of different customers. We understand the importance of quality and the importance of timely delivery. We know how to survive and thrive because we always focus on long-term development.
As a professional dryer OEM and exporter, Zhangsheng has exported to more than 45 countries. We have a full range of dryers. All air dryers are CE certified by TUV-SUD and TUV-Rheinland. The total number of dryers exported to Europe and North America each year exceeds 1500 units.
1.What information do I need to provide to give a quote and solution?
1)What is your raw materials?
2) What is the moisture content of your raw material?
3)How many output capacity do you want(per hour / month/ year)?4)What's your country voltage?
2.Besides professional drying equipment, what other products and services can you provide? We will also provide you with a wood pellet production line, it doesn't matter even if you are a beginner, just tell us your raw material, capacity (t/h) and the size of the final pellet product, we will choose the machine for you according to your specific situation. We also provide installation and arrange workshop layout, train workers.
3.Are you a factory or a trading company?
We have our own factory. we have over 15 years of experience in the pellet line manufacturing. "Market our own products" reduces the cost of intermediate links. OEM available according to your raw materials and output.
Complaint
