Textile Waste Clothing Yarn Cloth Opening Fiber Machine Opener and Cleaner Production Line

Min.Order: 1
Product origin: Jinan, Shandong, China
Infringement complaint: complaintComplaint
US$ 10000 ~ 17000

Description

1.Description of  Textile Waste Recycling Machine

Recycle kinds of textile waste ( cotton fabric polyester , knitting hosiery fabric ,denim waste, hard waste tread yarn , clothing and garment rags) get the fiber from these waste enable to use for rotor spinning and other textile business purpose , make good use of waste material save cost make benefit , normally use in spinning mills  garment mills  weaving mills cotton mills non-woven mills and fabric cotton waste processing mills .

 2.Features

Mainly release fiber, cotton, textile material, such as through tear at the tangle of large fiber loose solution into small pieces or beam, at the same time accompanied by blending in the process of release, in addition to the complex role.Opening machine is usually consists of a pair feeding roller or feed roller and an opening of cylinder, the opening Angle of nails or mounted on the cylinder or comb needle cloth or porcupine goons, for opening more completely, some still in work roll and strip roller mounted on the cylinder.Different structure makes its opening effect, mixing effect, the effect of removing impurity have obvious differences, so on the different requirements of the production line should adopt different forms of opening machine.Also can according to the processing of materials to choose opening machine, comb again after the opening of fiber feeding machine for processing.
TECHINICAL DESCRIPTION OF EQUIPMENTS

Fiber Recycling Line:2*GM600+5*GM250

NOITEMDESCRIPTION
1Model 2XGM600+5XGM250
RSpinning products
2Installation dimensions L15200W4000H4975(mm)
3Weight About 7200KGS
4Total power 22KW+18.5KW+7.5KW+5.5*4
5Working width1000mm/ UnadjustableR
1300mm/ Unadjustable
6 Main roller R6 channels/Φ600/Teeth wire
1st and 2nd units
R8 channels/Φ250/Teeth wire
3rd to 7th units
7Capacity£150-220Kg/h under the working width 1300mm
R120-180Kg/h under the working width 1000mm
Depending on the raw material and product requirements(length of fiber), also the correct operate
8Way of controlElectric control system
9Bearing KOYO/Or according to the customer's requirements
10Print ColorAccording to the customer's requirements
11The control cabinet and panelDigital display instrument, and equipped with knob regulator, professional electric schematic diagram
12Note
  1. CNC cutting equipment and machining center equipment will be used in the manufacture of the machine.
  2. All rotating shaft through dynamic balance test.
  3. Shaking range must be less than + / - 0.55 mm, and does not influence the main rollers (based on the correct installation and the base must be in the same plane under a highest speed)










Product Tag:
Related categories:
Scroll to Top