Complaint
Product Name | Water Transmission Industrial Copper Pipe, SF-Cu C12000 3 4 Copper Refrigeration Tubing Coil For Liquid Fed C1220 heat exchange tube Hydraulic Copper Pipe Tube 15mm copper pipe custom Copper Pipe Fitting |
Item | Copper tube ,Brass tube,Bronze tube |
Type | Straight copper pipe,Pancake coil copper pipe,Capillary copper pipe |
Standard | GB/T1527-2006,JIS H3300-2006,ASTM B75M,ASTMB42,ASTMB111,ASTMB395, ASTM B359,ASTM B188,ASTM B698,ASTM B640,etc |
Material | T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, TP1,TP2,C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, TU1,TU2,C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000,C44300, C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70600,C70620,C71000, C71500,C71520,C71640,C72200,etc |
Shape | Round,Square,Rectangular,Oval,half-round |
Round | OD:2-914mm (1/16"-36") WT:0.2-120mm(SCH5S-SCH160S) |
Square | Size:2*2-1016*1016mm(1/16"-40") WT:0.2-120mm |
Rectangular | Size:2*4-1016*1219mm(1/16"-48") WT:0.2-120mm |
Length | 1m,2m,3m,6m,or as required |
Hardness | 1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
Surface | mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required |
Application | 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Tubes for ACR and Refrigeration 4. Inner-grooved copper tube for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6.PE-coated copper tube for water/gas/oil transportation system 7.Semi-finished Copper tube for industrial applications |
CuZr has high strength and hardness, electrical and thermal conductivity, good wear resistance and wear reduction, after aging treatment of hardness, strength, electrical conductivity and thermal conductivity are significantly improved, easy to weld. Widely used in motor commutator, spot welding machine, seam welding machine, electrode for butt welding machine, and other high temperature requirements of strength, hardness, conductivity, guide cushion parts. The ideal mirror can be electrocorroded by making the EDM electrode. At the same time, the upright performance is good. It can achieve the effect that is difficult to achieve with pure red copper such as wafer making.
| Chemical component% | ||||||||
| ASTM | Cu | Fe | Pb | Sb | P | Sn | Bi | Zn |
| ≤ | ||||||||
| C37000 | 59.0-62.0 | 0.15 | 0.8-0.15 | - | - | - | - | margin |
| C31400 | 87-90.5 | 0.10 | 1.3-2.5 | - | - | - | - | margin |
| C36000 | 60.0-63.0 | 0.35 | 2.5-3.0 | - | - | - | - | margin |
| C33500 | 62.0-65.0 | 0.10 | 0.25-0.7 | - | - | - | - | margin |
| C36500 | 58.0-61.0 | 0.15 | 0.25-0.7 | - | - | 0.25 | - | margin |
| C35300 | 60.0-63.0 | 0.10 | 1.5-2.5 | - | - | - | margin | |
| C36000 | 60.0-63.0 | 0.35 | 2.5-3.0 | - | - | - | - | margin |
| C35330 | 59.5-64.0 | - | 1.5-3.5 | - | - | - | - | margin |
| C48600 | 59.0-62.3 | - | 1.0-2.5 | - | - | 0.30-1.5 | - | margin |
| BRASS | Tensile Strength (N/mm) | Elongation(%) | Hardness (HV) | ||||||
| Soft | 1/2H | H | Soft | 1/2H | H | Soft | 1/2H | H | |
| C2100 | ≥205 | 270-345 | ≥280 | ≥33 | ≥18 | - | ≤65 | 80-100 | ≥100 |
| C2200 | ≥225 | 295-365 | ≥320 | ≥35 | ≥20 | - | ≤70 | 95-120 | ≥120 |
| C2300 | ≥245 | 310-385 | ≥340 | ≥40 | ≥23 | - | ≤70 | 95-120 | ≥120 |
| C2400 | ≥255 | 320-405 | ≥375 | ≥44 | ≥25 | - | ≤80 | 100-130 | ≥125 |
| C2600 | ≥295 | 370-440 | 430-510 | ≥5 | ≥30 | ≥14 | ≤90 | 105-130 | 145-160 |
| C2680 | ≥295 | 370-440 | 430-510 | ≥45 | ≥30 | ≥14 | ≤90 | 105-130 | 145-160 |
| C2720 | ≥295 | 370-440 | 430-510 | ≥45 | ≥30 | ≥14 | ≤90 | 105-130 | 145-160 |
| C2800 | ≥320 | 410-490 | ≥450 | ≥35 | ≥15 | - | - | 105-130 | ≥130 |
Leaded brass is a complex brass with lead as the main additive element. It is a combination of Cu, Pb, Al and Zn4 non-ferrous metals in a certain ratio. Lead is rarely solidly soluble in Cu-Zn alloy, and exists as an independent phase in the alloy. The free particles are distributed in grain boundaries and crystals, which not only lubricates the metal, but also makes the chips break, which can improve the cutting property and wear resistance of brass. The workability of leaded brass is proportional to the lead content, but when the lead content exceeds 3%, the workability of copper is no longer significantly improved, and the hardness, strength and elongation of brass are reduced. Therefore, the main properties of lead brass can be summarized as wear resistance, corrosion resistance and good toughness.
1.Who are we?
We are based in Shandong, China, start from 2021,sell to North America(20.00%),Eastern Europe(10.00%),Southeast Asia(10.00%),South America(5.00%). There are total about 11-50 people in our office.
2. How do you control the quality?
We have professional inspectors to analyze chemical composition of raw materials and test the finished products strictly according to standard stipulated in the contract. In this process, Internal and external surfaces, two ends appearance, bending degree, fixed length, outer diameter and wall thickness dimension etc will be checked one by one. You can be assured that all the products you get from us are reliable.
3.Can you accept customization?
Yes. If you have special requirements on products or packages, we can do customization for you.
4. Why should you buy from us not from other suppliers?
We are a factory setted up more than 20 years and export more than 15 years. we have ISO 9001 certificate. Professional team to create accurate data.
5.What services can we provide?
Accepted Delivery Terms: FOB,FCA,DDP,DDU; Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,PayPal,Western Union;
Acceptance port of delivery: Tianjin, Qingdao, Guangzhou, Shanghai, etc
Language Spoken:English,Chinese
6.How can we get your price ?
We need below information to quote for you:
Product Name
Standard
Material Grade (Chemical Composition)
Dimension
Quantity
The Drawing for Special Parts
