Complaint
Ventilation of the sanding booth
LONGXIANG sanding booth has several ventilation systems which provide better painting conditions. All the filter systems and air exhaust systems underneath create a efficiently vertical air flow; and this air flow distribute inside of the booth evenly; then this air flow make overspray removing away from the vehicle immediately and completely.
Air recirculation on baking model
100% of the air produced by the fan is transported into LONGXIANG sanding booth during the baking model; and only 15%-20% is expelled outside which means the balance 85%-80% is recovered and filled up with fresh air by means of the changeover damper.
The inner temperature of the LONGXIANG sanding booth raises rapidly; Then the heating system will power off at once when it reaches at baking temperature, this will save more energy.
Lighting
The lighting system is provided by four*16W light fixed in the ceiling panels and side walls. They are sealed with 5mm tempered safety glass. LONGXIANG spray booth lighting system is able to supply enough lighting with lower energy consume safely.
Filters
The filtering system is made up by high-efficiency filters. The filers hold higher dust retention capacity and lower resistance to the air passage. The long life designing reduces frequency of replacement, which is contributing to reductions in running costs.
Warranty
Our equipments except quick-wear-parts are guaranteed for 12 months from the date of receipt, and the filters and lamps are quick-wear-parts.
| Specification of Prep-station (LX-6100) | |
| Inside dimension | 6300×3450×2800mm(L×W×H) |
| Outside dimension | 7550×3550×3200mm(L×W×H) |
| Basement and floor | Without basement |
| Ceiling system | 6400×3550×520mm(L×W×H),with coaming all sides,lighting between the coaming along the length.The back section of the ceiling is sealed by seal plate |
| Generator setting type | Rear exhaust;square tube frame;white color coated steel |
| Exhaust system | Generator cabin dimension:2290×1200×1800mm(L×W×H);5.5KW one set inner motor centrifugal fan with air capacity 16000m³/h,belt-drive,electric damper to control the air inlet and outlet volume |
| Seal type | Back side set 50mm EPS,other 3 sides with PVC soft curtain,curtain color:upper part:white,middle part:transparent,lower part:white |
| Ceiling installation | Steel rope hanging or steel pole supporting the roof(optional) |
| Filter system | Fiberglass filter |
| Lighting system | 8 units×3pcs=24×36W;side lights |
| Control system | Fan switch,lighting switch and electric damper switch |
| Voltage frequency | 380V/3PH or 220V/1PH,50HZ |
| Total power | 6.4KW |
