Kdh1460 72V 96V 120V 144vprogrammable High Power Pm Brushed DC Motor Controller High Current 600A Opto-Isolated Brushed DC Series/Pm Controller

Opto-isolated technology achieve stability.

Intelligence with powerful microprocessor.

Synchronous rectification, ultra low drop, and fast PWM to achieve very high efficiency.

Current limit and torque control.

Low EMC.

LED fault code.

Voltage monitoring on voltage source 12V and 5V.

Hardware over current protection.

Hardware over voltage protection.

Support torque mode, speed mode, and balanced mode operation.

Configurable limit for motor current.

Battery protection: current cutback, warning and shutdown at configurable high and low battery voltage.

Rugged aluminum housing for maximum heat dissipation and harsh environment.

Rugged high current terminals, and rugged aviation connectors for small signal.

Thermal protection: current cut back, warning and shutdown on high temperature.

Configurable high pedal protection: the controller will not work if high throttle is detected at power on.

Brake switch is used to start regen.

0-5V brake signal is used to command regen current.

Easy installation: 1-4V "Hall Active" throttle or "3 Wire" potentiometer(<100K) can work.

Standard PC/Laptop computer to do programming. No special tools needed.

User program provided. Easy to use. No cost to customers.

Frequency of Operation: 16.6kHz.

Standby Battery Current: < 0.5mA.

Controller supply voltage range, PWR, 10 to 30V(24V is preferred).

Supply Current, 200mA @ 12V, or 2.5W.

Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).

Analog Brake and Throttle Input: 0-5 Volts. Producing 0-5V signal with 3-wire pot.

Reverse Alarm, Main Contactor Coil Driver, Meter.

Full Power Temperature Range: 0ºC to 50ºC (controller case temperature).

Operating Temperature Range: -30ºC to 90ºC, 100ºC shutdown (controller case temperature).