160 H Ton Double Crank Precision C Frame High Speed Power Metal Stamping Press Machine

Description

With high rigidity rack design,they are welded with the use of high-quality steel plates,through relieving of internal stresses,so that stability and reliability of the whole machine in precision are enhanced.


Performance Feature

1.Hight steel performance frame,large center span of the conneeting rod,strong anti partial load,optimize design.
2.In order to guarantee relative stationarity of machine operation,it is necessary to balance two balancers.
3. Moulding-adjustment precision is as high as 0.1mm, safe, speedy,and reliable.
4. Through hard oxidation and grinding, such parts as bent axles, gear sets,and connecting rods possess higher combination property and tolerance.
5.Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety
   for operation and stop of press rams.
6.Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
7.Possess advanced design concepts, low noise, low consumption, and energy saving.



Technical Specification
 

Name	Unit	APC-110		APC-160		APC-200		APC-250		APC-315
Model		V	H	V	H	V	H	V	H	V	H
Capacity	ton	110		160		200		250		315
Rated tonnage point	mm	5	3	6	3	6	3	7	3.5	7	3.5
Stroke	mm	180	110	200	130	250	150	280	170	280	170
Stable speed	s.p.m	35-65	50-100	30-55	40-85	25-45	35-70	20-35	30-60	20-35	30-60
Max.die height	mm	400	435	450	485	500	550	550	605	550	605
Slide adjustment	mm	100		100		120		120		120
Bolster area	mm	1800×650×130		2000×760×150		2400×840×170		2700×900×170		2700×900×170
Slide area	mm	1400×500×70		1600×550×70		1850×650×95		2100×700×95		2100×700×95
Main motor	kwxP	11×4		15×4		18.5×4		22×4		30×4
Air pressure	Mpa	0.6		0.6		0.6		0.6		0.6
Presses precision		JIS(CNS) 1class
Die cushion model		Two plate & two cylinders
Die cushion capacity	ton	3.6×2		6.3×2		10×2		14×2		14×2
Air pressure	Mpa	0.6		0.6		0.6		0.6		0.6
Stroke	mm	80		80		80		100		100
Die cushion work part dimension	mm²	350×235×2		410×260×2		540×350×2		640×470×2		640×470×2

Standard configuration




> Dry clutch brake
> Standard operating system of yiduan
>Choice/cutting/inch/safe journey/continuation of operating mode
> Oil pressure overload protection device
> Over-run safety device
> Duplex magnetic valve

> Misfeed detection consent
> Electric slider adjusting device
> Digital moulding-height indicator (unit:0.1mm)
> Electric butter lubricating device
> Accumulative counter (6 digits)
> Pre-determined counter (6 digits)

> Maintenance counter (6 digits)
> Life counter (6 digits)
> Electronic rotatry cam switch (6 connections)
> Air-blast device 1/2" one circuit
> Air source connector 1/2" two circuit
> Error inspection socket
> Power socket

Optional Configuration

> Wet clutch brake
> Die cushion device
> Vs variable-speed motor
> Touch-screen device
> Photo-electric safety device
> Upper slider feeding device
> Main motor inversion device
> Foot switch

> Safety dog and safety latch
> T-type two-hand button operating floon
> Inspection variable-connection magnetic valve
> Anti-vibration mechanical foot
> Rapid tooling exchange
> Upper die clamper
> Lower die clamper

> Die lifter
> Mould-shift arm
> Basic bolt and soleplate
> Automatic feeder device
> Three-in-one NC straightening feeder
> NC Roll feeder
> Three-in-one feeder and straightening machine
> Leveller


Transport And Pack

We are currently reviewing our product packaging from the angles of waste-reduction and resource-saving. We are also working on improving transportation efficiency from the design phase of product development.
All the spare parts of the machine were covered by the some soft materials mainly using plastic film.
Our wooden pallet is after fumigation treatment. Needn't timber inspection, saving shipping time.
Our metal pallet is special designed and paint grease at the bottom so that we can load easily.

 

Enterprise Profile





 

Our Customers





Why Choose Us?

Yiduan are specialist in manufacturing precision and high-speed punching press machines (15-2500T). Our company has many super large CNC machines and various precision testing machines. By advanced quality control method of a whole series imported physical & chemical equipment and enterprise information engineering such as ERP, PDM, CAM, etc. To realize a quick response to the market's demands.

Yiduan insists to the quality policy of "pursue excellent quality with a dedicate service" and continuously improves the whole company's quality awareness and the overall quality level. We define a clear quality objectives and principles to guarantee the products advancement, reliability and advantages in market competition. We are looking forward to your prompt orders and welcome to contact us for any special requirement.