Description
Fiberglass Stitched FabricFiberglass stitched fabric compatible with Polyester, Vinyl and Epoxy resin and widely used in pultrusion pipes and tanks, FRP boat, insulation panels, anode tubes, auto parts, bath tubes etc, suitable for pultrusion, filament winding, RTM, hand lay-up processes.Product Description
A:Fiberglass Stitched Mat
1.Features and usage: Fiberglass stitched mat is made of chopped fiberglass strands in a certain length, then freely put and stitched together with polyester tissue or carbon fiber tissue by polyester yarn. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in pultrusion pipes and tanks, FRP boat, insulation panels, anode tubes, auto parts, bath tubes etc, suitable for pultrusion, filament winding, RTM, hand lay-up processes.2.General data| Code | Weight (g/m2) | Chopped strand
(g/m2) | Polyester tissue
(g/m2) | Carbon tissue
(g/m2) | Moisture
Content | Wet speed
(≤S) |
| RUL250 | 250 | 250 | - | - | ≤0.2 | ≤60 |
| RUL300 | 300 | 300 | - | - | ≤0.2 | ≤60 |
| RUL300/C20 | 320 | 300 | - | 20 | ≤0.2 | ≤60 |
| RUL300/N45 | 345 | 300 | 45 | - | ≤0.2 | ≤60 |
| RUL380 | 380 | 380 | - | - | ≤0.2 | ≤60 |
| RUL380/C20 | 400 | 380 | - | 20 | ≤0.2 | ≤60 |
| RUL380/N45 | 425 | 380 | 45 | - | ≤0.2 | ≤60 |
| RUL400 | 400 | 400 | - | - | ≤0.2 | ≤60 |
| RUL400/C30 | 430 | 400 | - | 30 | ≤0.2 | ≤60 |
| RUL400/N45 | 445 | 400 | 45 | - | ≤0.2 | ≤60 |
| RUL450 | 450 | 450 | - | - | ≤0.2 | ≤60 |
| RUL450/N45 | 495 | 495 | 45 | - | ≤0.2 | ≤60 |
| RUL600 | 600 | 600 | - | - | ≤0.2 | ≤60 |
3.Remarks:1) Roll width: Standard width in 1200mm, 1270mm, and other sizes depends on customer's real needs, available in 200mm to 3200mm.
2) Packing: Fiberglass stitched mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
3) Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15ºC to 35ºC and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.Product Parameters
B: Single Warp Fiberglass Fabric
1.Features and usage:
Single warp fiberglass fabric is made of fiberglass direct roving parallel aligned in 0°directions, then stitched by polyester yarn. Also can select to add chopped strand layer or non-woven fabric layer stitched together. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in wind energy, boat building, FRP pipes and tanks, pultrusion section industry etc, suitable for pultrusion, hand lay up, filament winding, vacuum infusion processes.
2.General data
| Code | Weight
(g/m2) | 0°Warp (g/m2) | 90°Weft (g/m2) | Chop strands (g/m2) | Polyester tissue
(g/m2) | Layer |
| RUL336 | 336 | 336 | - | - | - | 1 |
| RUL400 | 400 | 400 | - | - | - | 1 |
| RUL420 | 420 | 400 | - | - | - | 1 |
| RUL560 | 560 | 560 | - | - | - | 1 |
| RUL600 | 600 | 420 | 180 | - | - | 2 |
| RUL625 | 625 | 400 | - | 225 | - | 2 |
| RUL625/N45 | 670 | 400 | - | 225 | 45 | 3 |
| RUL672 | 672 | 672 | - | - | - | 1 |
| RUL800 | 800 | 672 | 128 | - | - | 2 |
| RUL900 | 600 | 600 | - | 300 | - | 2 |
3.Remarks:
1.Roll width: Standard width in 1270mm, and other sizes depends on customer's real needs, available in 200mm to 2600mm.
2.Packing: Single warp fiberglass fabric is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
3.Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15ºC to 35ºC and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.
C: Fiberglass Stitch Bonded Fabric1.Features and usage:
Fiberglass stitch bonded fabric is made of fiberglass direct roving parallel aligned in 0°and 90°directions, then stitched together with chopped strand layer or polyester tissue layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, flat panels etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes. 2.General data| Code | Weight (g/m2) | 0°Warp
(g/m2) | 90°Weft
(g/m2) | Chop layer
(g/m2) | Polyester
tissue layer
(g/m2) | Moisture content | Wet speed
(≤S) |
| RUL400 | 400 | 224 | 176 | - | - | ≤0.2 | ≤60 |
| RUL400/45 | 445 | 224 | 176 | - | 45 | ≤0.2 | ≤60 |
| RUL-A-400/200 | 600 | 224 | 176 | 200 | - | ≤0.2 | ≤60 |
| RUL-A-450/200 | 650 | 224 | 226 | 200 | - | ≤0.2 | ≤60 |
| RUL600 | 600 | 336 | 264 | - | - | ≤0.2 | ≤60 |
| RUL-B-600/45 | 645 | 336 | 264 | - | 45 | ≤0.2 | ≤60 |
| RUL-A-600/300 | 900 | 336 | 264 | 300 | - | ≤0.2 | ≤60 |
| RUL-A-600/450 | 1050 | 336 | 264 | 450 | - | ≤0.2 | ≤60 |
| RUL800 | 800 | 420 | 380 | - | - | ≤0.2 | ≤60 |
| RUL-B-800/45 | 845 | 420 | 380 | - | 45 | ≤0.2 | ≤60 |
| RUL-A-800/250 | 1050 | 420 | 380 | 250 | - | ≤0.2 | ≤60 |
| RUL-A-800/300 | 1100 | 420 | 380 | 300 | - | ≤0.2 | ≤60 |
| RUL-A-800/450 | 1250 | 420 | 380 | 450 | - | ≤0.2 | ≤60 |
| RUL1000 | 1000 | 560 | 440 | - | - | ≤0.2 | ≤60 |
| RUL1200 | 1200 | 672 | 528 | - | - | ≤0.2 | ≤60 |
| RUL-A-1200/300 | 1500 | 672 | 528 | 300 | - | ≤0.2 | ≤60 |
3. Remarks:1) Roll width: Standard width in 1200mm, 1270mm, and other sizes depends on customer's real needs, available in 200mm to 2600mm.
2) Packing: Fiberglass stitch bonded fabric is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
3) Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15ºC to 35ºC and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.D: Fiberglass Double Biaxial Fabric1.Features and usage:
Fiberglass double biaxial fabric is made of fiberglass direct roving parallel aligned in +45°and -45°directions, then stitched together with or without chopped strand layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, containers etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes. 2.General data| Code | Weight (g/m2) | +45°(g/m2) | -45°(g/m2) | Chop layer
(g/m2) |
| RUL450 | 450 | 225 | 225 | - |
| RUL600 | 600 | 300 | 300 | - |
| RUL-A-600/225 | 825 | 300 | 300 | 225 |
| RUL-A-600/300 | 900 | 300 | 300 | 300 |
| RUL-A-600/450 | 1050 | 300 | 300 | 450 |
| RUL800 | 800 | 400 | 400 | - |
| RUL-A-800/225 | 1025 | 400 | 400 | 225 |
| RUL-A-800/300 | 1100 | 400 | 400 | 300 |
| RUL-A-800/450 | 1250 | 400 | 400 | 450 |
3.Remarks:
1.Roll width: Standard width in 1250mm, 1270mm, and other sizes depends on customer's real needs, available in 200mm to2600mm.
2.Packing: Fiberglass double biaxial fabric is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
3.Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15ºC to 35ºC and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.
E: Multiaxial core mat
1.Features and usage:
Multiaxial core mat is made of biaxial fabric (0°and 90°) combined middle layer PP, PET or Nylon core material and plus the chopped strands layer, then stitched together like sandwich design. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, train parts, storage tanks etc, suitable for RTM, Vacuum infusion, hand lay-up forming processes.
2.General data| Code | Weight (g/m2) | Biaxial layer
(g/m2) | PP Core layer (g/m2) | Chop layer
(g/m2) | Moisture
content | Wet speed
(≤S) |
| RULBA600/180/150 | 930 | 600 | 180 | 150 | ≤0.2 | ≤60 |
| RULBA600/180/300 | 1080 | 600 | 180 | 300 | ≤0.2 | ≤60 |
| RULBA600/180/600 | 1380 | 600 | 180 | 600 | ≤0.2 | ≤60 |
| RULBA600/250/600 | 1450 | 600 | 250 | 600 | ≤0.2 | ≤60 |
| RULBA800/250/300 | 1350 | 800 | 250 | 300 | ≤0.2 | ≤60 |
| RULBA800/250/450 | 1500 | 800 | 250 | 450 | ≤0.2 | ≤60 |
| RULBA800/250/600 | 1650 | 800 | 250 | 600 | ≤0.2 | ≤60 |
3.Remarks:
1.Roll width: Standard width in 1270mm, and other sizes depends on customer's real needs, available in 200mm to 2600mm.
2.Packing: Fiberglass multiaxial core mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
3.Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15ºC to 35ºC and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.
F: Fiberglass Triaxial Fabric1.Features and usage:
Fiberglass triaxial fabric is made of fiberglass direct roving parallel aligned in 0°,+45°,-45°or +45°,90°,-45°directions, then stitched together with or without chopped strand layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, containers etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes. 2.General data
| Code | Weight (g/m2) | 0°
(g/m2) | +45°(g/m2) | 90°(g/m2) | -45°(g/m2) | Chop layer
(g/m2) |
| RULX600 | 600 | 300 | 150 | - | 150 | - |
| RULX750 | 750 | 300 | 225 | - | 225 | - |
| RULTX750 | 750 | - | 200 | 350 | 200 | - |
| RULX900 | 900 | 300 | 300 | - | 300 | - |
| RULTX900 | 900 | - | 225 | 450 | 225 | - |
| RULX1200 | 1200 | 700 | 250 | - | 250 | - |
| RULXA1200/300 | 1500 | 700 | 250 | - | 250 | 300 |
| RULTXA1200/300 | 1500 | - | 250 | 700 | 250 | 300 |
3.Remarks:
1.Roll width: Standard width in1250mm, 1270mm, and other sizes depends on customer's real needs, available in 200mm to2600mm.
2.Packing: Fiberglass triaxial fabric is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
3.Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15ºC to 35ºC and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.
G: Woven Roving Combo Mat1.Features and usage:
Woven roving combo mat is made of woven roving and chopped fiberglass strand complex of, then stitched together with polyester yarn. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, Auto parts, refrigerated tools and structural sections industry etc, suitable for hand lay up, RTM, pultrusion, vacuum processes. 2.General data
| Code | Weight (g/m2) | Woven roving
(g/m2) | Chopped strand
(g/m2) | Moisture Content | Wet speed
(≤S) | Layer |
| RULRM200/200 | 400 | 200 | 200 | ≤0.2 | 60 | 2 |
| RULRM300/300 | 600 | 300 | 300 | ≤0.2 | 60 | 2 |
| RULRM400/300 | 700 | 400 | 300 | ≤0.2 | 60 | 2 |
| RULRM500/300 | 800 | 500 | 300 | ≤0.2 | 60 | 2 |
| RULRM500/450 | 950 | 500 | 450 | ≤0.2 | 60 | 2 |
| RULRM600/300 | 900 | 600 | 300 | ≤0.2 | 60 | 2 |
| RULRM600/450 | 1050 | 600 | 450 | ≤0.2 | 60 | 2 |
| RULRM800/300 | 1100 | 800 | 300 | ≤0.2 | 60 | 2 |
| RULRM800/450 | 1250 | 800 | 450 | ≤0.2 | 60 | 2 |
3.Remarks:1.Roll width: Standard width in 1250mm, 1270mm, and other sizes depends on customer's real needs, available in 200mm to 2600mm.
2.Packing: Fiberglass woven roving combo mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
3.Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15ºC to 35ºC and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.
H: E-Glassfiber ST Woven
1. PropertiesE-glassfiber ST woven is characterized by flame-retardant, corrosion & heat resisrant, high strength and insulation, etc. It is widely used in chemical industry .shipping , automobile .architecture, etc. Because it has special property such as hear-resistant,fire-proof and impact-resistant, so it is widly used in helmet and pine line. According to sizing it is no-paraffin. It can be consistented with multi-resin system, such as UP, Vinyl resin , Epoxy resin etc.2. Specifications| Specifications | Nominal
Quality g/m2 | Quality
Deviation
% | Breaking Strength ZN/25mm | Texite Density Piece/cm | Weave | Width
cm |
| | | | Warp | Weft | Warp | Weft | | |
| EW250 | 250 | ±10 | 1600 | 1200 | 15.2 | 9.4 | twill | 100 |
| EW250 | 250 | ±10 | 1600 | 1500 | 13.6 | 11.0 | twill | 100 |
| EW300 | 300 | ±10 | 2000 | 1700 | 16.0 | 12.0 | twill | 100 |
| EW400 | 400 | ±10 | 2500 | 1450 | 19.2 | 10.4 | twill | 100 |
| EW500 | 500 | ±10 | 2500 | 1600 | 18.2 | 10.4 | twill | 100 |
Remark:1.According to standard JC/T170-1996.
2.Welcome to make demands on other specifications.
The highest softening temperature is 550-750eC
Application
Company Profile
Founded in 2002, Changzhou Rule Composite Material Co., Ltd, is a enterprise engaged in in manufacturing high-performance unsaturated polyester resin, gel coat, glass fiber reinforced composite materials and other related products, also professional in research, development as well as technical consulting and services of composite materials.
Rule Composite Material covers an area of 50, 000 square meters, with a modern office building, an independent R& D center and a high-standard production workshop, equipped with the leading DCS automatic control production device. We also have a strong and advanced quality control department and technical support laboratory.
RULE focuses on the production of excellent-quality and creative-design resin products, so it is trustworthy. Our sweat and wisdom witness the footprints of yesterday's struggle, passion and dream fulfill today's victory. Forging ahead to make innovation in market economy, pursuing value of "innovation, creativity, sharing" in practice, it harvests a stream of praises and honors.
Our Advantages
Why we choose Changzhou Rule Composite Material Co., Ltd?
What is resin?
Resin usually refers to products inclined to softening or melting after receiving heat. When softening, it shows a trend toward flowing under the influence of external forces. Under normal temperature, it is in solid, semi-solid state, and sometimes liquid organic polymer. Broadly speaking, any macromolecule compound that can be used as a raw material for plastic processing can be called resin.
What can resins do for you?
Resin products are widely used in sectors like railways, automobiles, wind power, shipbuilding, cooling towers, pipelines, coatings, electrical appliances, artificial stone, handicrafts, lighting tiles, sanitary ware, anti-corrosion engineering and so on. Rule has been granted certification of ISO9001: 2008 Quality Management System and ISO14001: 2004 Environmental Management System, and some products have won recognition of China Classification Society(CCS) and Food-Level Licenses of the Provincial Department of Health.
We are the professional resin solution provider.
With decades of experience in the R& D of resins, we can fully understand customers' needs and aspirations in the cooperation process and have presented countless solutions. Over the years, we work hard to optimize our products and make them attractive to end users.
Exhibition photos
Packaging & Shipping
This product is packed in pallets, every single roll is in a shrinkage polybag, 3-4 layers for each carton, or 48-64 rolls/each carton.
The product should be stored in the dry and open environment to prevent wetting out and also should be packed completely.
The best storage temperature is 5-35°C, moisture degree is 35-65%, this product is better to be used up in 12 months.
Maximum two layers of pallets is allowed vertically stacked if the storage space limited.
Complaint
