Adjustable Concrete Stair Mold, Precast Staircases Mould

Min.Order: 1
Product origin: Dezhou, Shandong, China
Infringement complaint: complaintComplaint
US$ 13500

Description


                               Concrete stairs casting mold/Prefab house concrete stairscase mold/Concrete adjustable stairs mold

Prefabricated Staircase Production Line including below type:
Horizontal Adjustable Staircase Mold
Vertical Slip Side-opening Staircase Mold
Vertical Bottom Mold Separated Staircase Mold
Vertical Tilting Staircase Mold

 

Advantages: light weight, simple debugging, quick mold-cutting, good sealing effect, small manual calendering surface, extremely low surface area of the component, suitable for mass production of clean water stairs.

Vertical sliding side opening mold, no need for large equipment for opening and closing molds, manual operation is quick and easy, and high efficiency.

Adopting unique welding process, the flatness of the surface of the stair mold can be controlled within 2mm, and the height difference of the jigsaw is guaranteed within 0.5mm.

We can make the stair mold "drip without leaking" and go through the two test water test procedures before leaving the factory to ensure the production of clean water stair components.

The artificial light-receiving surface is small, and the appearance of the component is excellent after molding.

Stair mold customers use the country and Southeast Asia, Russia and other countries, with an annual sales volume of more than 1,000 sets.

The stairs have been precisely calculated in terms of the strength of the force to ensure the rigidity of the mold and the service life can reach more than 500 times.

Adjustable stair mold

Advantages: Under the premise of the same step width and thickness of the ladder, the step height, the number of steps and the length of the upper and lower rest platforms can be adjusted, and the pneumatic vibrator is provided. A set of molds can produce a variety of stair components. Suitable for stairs with a small amount of production and many types.

At the same time, we can customize all kinds of "horizontal staircase moulds, one-die double-stair moulds, balcony moulds, bay window moulds and other kinds of special-shaped moulds

HLT01 vertical sliding side open staircase mold

Technical characteristics

Specification size: step number 7-17 steps, stair width 700-2000mm, step height 150-200mm (other sizes can be customized);

Vertical sliding side opening mold, no need for large equipment for opening and closing the mold, manual operation is simple and fast, and the efficiency is high;

 Adopting unique welding process, the flatness of the surface of the stair mold can be controlled within 2mm, and the height difference of the jigsaw is guaranteed within 0.5mm;

We can make the stair mould "drip without leaking", after two test water test procedures, before leaving the factory to ensure the production of clean water stair components;

The artificial light-receiving surface is small, and the appearance of the component is excellent after molding;

The stairs have been precisely calculated in terms of the strength of the force to ensure the rigidity of the mold and the service life can reach more than 500 times.

HLT02 vertical sliding side open staircase mold (beam type)

Technical characteristics

Customized design "double beam staircase", "single beam type", etc. according to customer's stair components;

The stair members produced are light in weight and easy to hoist;

Vertical sliding side opening mold, no need for large equipment for opening and closing the mold, manual operation is simple and fast, and the efficiency is high;

Using a unique welding process, the flatness of the surface of the stair mold can be controlled within 2mm, and the height difference of the jigsaw is guaranteed within 0.5mm;

We can make the stair mold "drip water does not leak", after two test water test procedures, before leaving the factory to ensure the production of clean water stair components;

The artificial light-receiving surface is small, and the appearance of the component is excellent after molding;

 This staircase has been precisely calculated in terms of the strength of the force to ensure the rigidity of the mold and the service life can reach more than 500 times.

HLT03 vertical bottom mold separated staircase mold

Technical characteristics

The side mold and the bottom mold can be completely separated. A set of side molds is equipped with multiple sets of bottom molds. Before the components are formed and the lifting strength is not reached, the side molds can be removed and transferred to the next set of bottom molds. The single-workday component has a high output quantity and is suitable for projects with tight production schedules;

Adopting unique welding process, the flatness of the surface of the stair mold can be controlled within 2mm, and the height difference of the jigsaw is guaranteed within 0.5mm;

Stair mould "Drip water does not leak", after two water test procedures, it can be shipped to ensure the production of clean water stair components;

The artificial light-receiving surface is small, and the appearance of the component is excellent after molding;

The stairs have been precisely calculated in terms of the strength of the force to ensure the rigidity of the mold, and the service life can reach more than 500 times;

Customized design according to customer's stair components.

HLT04 horizontal staircase mold

Technical characteristics

Customized design according to customer's stair components;

Horizontal production method, the step surface of the component faces downward, and the side of the plane is the artificial light-receiving surface. The horizontal production artificial light-receiving surface is large, the appearance is not as good as the vertical production, and the components need to be turned over. The advantage is that the mold is lighter and suitable for projects with a small production quantity and low requirements on the appearance of the components;

Using a unique welding process, the flatness of the surface of the stair mold can be controlled within 2mm, and the height difference of the jigsaw is guaranteed within 0.5mm.

HLT05 horizontal adjustable stair mold

Technical characteristics

Designed by Italian experts with more than 40 years experience in mold design;

This staircase has been accurately calculated in terms of the strength of the force, and the service life can reach more than 800 times;

Stair design installed step 17 (can adjust the number of steps according to demand), each step width: 260mm (fixed and customizable), kick height: 150~200 (adjustable);

The upper platform of the stairs: up to 1500mm (adjustable);

The lower platform of the stairs: up to 1500mm (adjustable);

Using the original imported UHF pneumatic vibrator from Italy, the speed is up to 11000r/min, low amplitude and high frequency to ensure the high density of the components.





Dezhou Haitian
 was founded in 1997. We have obtained 20 China national patents, products approved ISO9001:2008 certificate, CE certificate and EU Customs Union CU-TR certificate. For the past several years Haitian has been rated "AAA grade quality and integrity of Chinese brands". We are also the Vice President Enterprises of "China National Precast Concrete and Cement Products Association"

\

Case:




 



Our Certificate



We supply technical supporting all the time.
Our salesman will be online for 24 hours.
You can visit us at any time.
We supply one year warranty for whole machine.
We supply free quick wear parts.
We supply low charge continue maintenance when warranty is expired.
We supply free training for end-users.
 
Scroll to Top