Reuseful Lighting for LED Walking Billboard Advertising Human Billboard Portable Billboard

No dark area LED restaurant menu light box with LED module each 3 LED cuttable

 

High power LED light bars is a lighting solution specially made for light box which thickness is more than 100mm for single side lighting, 150mm for double sides lighting. 

 

The super brightness, great uniform light effect, and easy installation are the main obvious features. The DC12-30V input/output voltage is very safe for usage. 

 

The inner constant voltage curcuit design and outer constant current design of LED light bars make the lights working more steady.   

 

The strip led osram has some features as below:

1. Osram LED chip is used. 

2. Energy saving lighting strip. 

3. Constant current, conversion efficiency is more than 95%. 

4. Uniform brightness. 

5. Compliance with international safety standards. 

6. Adopted PMMA high efficiency lens. 

7. DC24~30V wide voltage input, brightness remains unchanged.

8. CE, RoHS certified. 

9. Warranty: 2 years
   
   
   Parameter:
   

 

Remarks:

DC24V input voltage is suggested for this osram led strip. LED circuit works within the constant current curve, when LED bar input voltage is lower, the input current is higher, because the total power of ad LED should be constant, when the input voltage is higher, the input current is lower. The lower current has higher efficiency and can reduce the temperature on the aluminum board. Simply to say, DC24V input voltage has lower working temperature than that of DC12V input voltage.

 

Remarks:
Max connection: 5pcs per string.
 

The standard product of Osram led light strip is not dimmable, but the dimmable interface is reserved. Please specify when ordering. The wiring method of the dimmer is as follows. 

Recommended installation:

Sign depth=80~100mm	Distance on two sides lower than 2000mm
Sign depth=120~150mm	Distance on two sides lower than 2500mm
Sign depth=200mm	Distance on two sides lower than 3000mm
Sign depth=300mm	Distance on two sides lower than 4000mm

 

Come and contact us, you deserve good quality and considerate service. 

LED SHOW'S EXHITIONS:

LED SHOW'S WORKSHOP:

Certifications:

 

FAQ:
1. Can it be cut?
***No. Because this aluminum PCB is 2mm thick, we have professional tools to cut it to be 3LEDs or 6 LEDs. Ordinary tools cann't cut easily. If you need to cut, it is best to inform us in advance, we will cut and solder the terminal connectors directly and deliver it for your convenience. It can also avoid cutting errors and damage due to problems such as insufficient sharpness of tools when cutting on your side.

2. Why there are two same appearance but different length?
***Because we have light length 50cm and 20cm, 20cm light is specially for the distance shorter than 50cm but longer than 20cm, if no lights, there will be dark area. For example, 250cm cannot use 5pcs 50cm lights directly, because the inner length is not 250cm, so maybe 4pcs 50cm lights and 1-2 pcs 20cm lights. Hope I make you clear for that.

3. What information should I provide for you, to see if it is suitable for our project?
***Good question!
We need information as below:
3. How should I know the LED edge light bar quantity I need?
***Let's take an example. If your light box is 115 x 250 cm, you only need to install lights along 115cm sides. Our light distance can be 300cm from left to right side or top to bottom side. In this case, your light cost will be much lower.  Below is our 400cm * 300cm light box, we only installed lights along 400cm sides, no lights along 300cm sides. The light effect is quite good.
If you let us know your light box size, it will be better, we can give you the correct quantity directly.