Ordinary Type | Outer Diameter(mm) | Wall Thickness(mm) | Ordinary Length(mm) |
110 | 5 | 6000,9000 or as required | |
160 | 8 | 6000,9000 or as required | |
180 | 12 | 6000,9000 or as required | |
200 | 13 | 6000,9000 or as required | |
225 | 15 | 6000,9000 or as required | |
250 | 15 | 6000,9000 or as required | |
Enhanced Type | Outer Diameter(mm) | Wall Thickness(mm) | Ordinary Length(mm) |
110 | 7 | 6000,9000 or as required | |
160 | 10 | 6000,9000 or as required | |
180 | 15 | 6000,9000 or as required | |
200 | 16 | 6000,9000 or as required | |
225 | 18 | 6000,9000 or as required | |
250 | 18 | 6000,9000 or as required |
Project | Index |
Density(g/m3) | 0.91-0.95 |
Coefficient of sliding friction | <0.3 |
Tensile strength 23ºC±2ºC(Mpa) | ≥24.0 |
Flexural strength 23ºC±2ºC(Mpa) | ≥37.0 |
Flexural modulus (Mpa) | 1000-1200 |
Flat test 1/2 | No broken |
Vicat heat (10N,50ºC,h)ºC | ≥90 |
Drop hammer impact test(20mm,3kg,2m) | 9/10 qualified |
Ring-chip thermal compression force(KN) Nominal Wall Thickness(≥0.8KN) | 1.06 |