Description
2μm Wave Cut Zn-Al Capacitor Grade Metalized Polypropylene Plastic FilmThe metallized film is to vapor-deposit zinc and aluminum on the surface of the film in a vacuum state.
The material has large dielectric constant, high insulation resistance, good heat resistance and good
tensile properties, and is suitable for making metallized polypropylene film capacitors.Types Of Metallized Layer
Products Types
(1) One side metallization film with Zinc-Aluminum with heavy edge (Single Margin)
(2) One side metallization OPP film with Zinc-Aluminum with ramp resistance (Single Margin)
(3) One side metallization OPP film with Zinc-Aluminum with high resistance (Single Margin)
(4) Segmented metallized film
(5) Double side metallization PET film with Aluminum (Center margin)
(6) One side metallization OPP film with Aluminum (Single Margin)
(7) One side metallization OPP film with Aluminum (Single Margin)
(8) Internal multiple series with one side metallization OPP film with Zinc-Aluminum
(9) We can design and produce all kinds of metallized film for capacitors according to customer's requirement.Normal Specification Item
| Thickness(Micron)
| Width(mm)
| Margin (mm)
| ID(mm)
| OD(mm)
|
| MPP Film | 2 Micron/3 Micron/4 Micron/5 Micron/6 Micron/
7 Micron/8 Micron/9 Micron/10 Micron/12 Micron | 4.5mm-130mm | 0.4mm-5mm | 75mm+1/-0.5mm | 180/240/
320/330 |
Note:Other specifications and sizes of metallized capacitor film which are not in the above table can be negotiable.Parameters Of MPP Film | Properties | Unit | Typical value |
| Density | g/cm3 | 0.905±0.005 |
| Thickness | µm | 2.0µm-12µm |
| Tensile Strength | MD(MPa) | ≥100 |
| Elongation at Break | MD(%) | 20~200 |
| Elastic Modulus | MD(MPa) | 2800 |
| Heat Shrinkage | MD(%) | ≤5 ( 120ºC, 10min) |
| Wetting Tension | mN/m | 38(Corona treated side) |
| Surface Roughness | µm | 0.08 |
| Melting Point | ºC | 172 |
| Volume Resistivity | Ω.m | >1015 |
| Break-dowm Voltage | V/µm | ≥350(23ºC,DC) |
| Dielectric Constant | | 2.2 (20ºC,1KHz) |
| Dissipation Factor | | ≤4×10-4 (20ºC,1KHz) |
| RC | Ω F | ≥5×104 |
Parameters Of MPET Film | Properties | Unit | Typical value |
| Density | g/cm3 | 1.4 |
| Thickness | µm | 1.9µm-12µm |
| Tensile Strength | MD(MPa) | ≥84 ≥108 ≥120 |
| Elongation at Break | MD(%) | ≥22 ≥33 ≥44 |
| Elastic modulus | MD(MPa) | 3500 |
| Break-dowm voltage | V/µm | >=200 >=250
(23ºC,DC) (23ºC,DC) |
| Heat Shrinkage | MD(%) | ≤2.5(150ºC, 10min) |
| Surface roughness | µm | 0.095 |
| Melting point | ºC | 256 |
| Volume resistivity | Ω.m | >1015 |
| Dielectric constant | | 3.2 |
| Dissipation Factor | | ≤60×10-4 |
| RC | Ω F | ≥1×104 |
Company Certifications
Production Workshop
Packing & Storage
(1) Film rolls are packed and heat-sealed in vacuum plastic bags with desiccants inside.
(2) The bags are marked with type labels.
(3) The bags are packed in carton cases.
(4) The cartons are wrapped in wooden cases or reinforced carton
(1)Metallized film should be stored in its original package with temperature 5~35ºC and humidity less
than 85%RH before using.(2)Metallized layer is easily oxidized when exposure to moisture.Therefore,the film should be used as
soon as possible when opened.(3)The recommended temperature is 15-25ºC with humidty less than 60%RH after opening.(4)With original sealed package,and stored as mentioned above,the storage time can be as following:Al metallized film:12 months from the delivery date.Al/Zn Alloy metallized film :As zinc is quite unstable,
the storage period(from delivery date) depends on the resistance of the film:<=10Ω/Square:6 months 10-30Ω/Square:3 months >30Ω/Square:1 monthR & D Patents
Honors Our Company Has ReceivedGeographical Advantage
FAQ
Q1. Are you a manufacturer?Yes,we are professional capacitor film manufacturer and have specialized in this industry for decades.Q2. What specification of capacitor film do you provide?For MPP film, the thickness we provide is 2μm-12μm. For MPET film, the thickness we provide is 1.9μm-12μm.
Regular width: 30mm, 37.5mm, 50mm, 60mm, 62.5mm, 75mm, etc. Regular margin:1mm,1.5mm,2.0mm, 2.5mm,
etc.Q3. How do you ensure your quality?Our company have obtained ISO9001,ISO14001,OHSAS18001, CQC, TUV, UL, CE and other relevant certifications,
in compliance with RoHS and REACH directive requirements. Quality first, Customer foremost, Build tomorrow's business with today's service!
Complaint
