Fostar ODM LED Display Tracking Camera Wheel Alignment System for Car and Truck

Min.Order: 1
Product origin: Zhuhai, Guangdong, China
Infringement complaint: complaintComplaint
US$ 2200 ~ 2540

Description
 
  • The wheel aligner is used to detect the vehicle wheel alignment parameters, compare them with the original parameters, and guide the user to adjust the wheel alignment parameters accordingly to meet the original requirements, so as to achieve the ideal driving performance of the car, that is, easy to operate, stable and reliable to drive, and reduce tire wear. During the inspection work, the wheel aligner first measures the actual alignment parameters of the car, and then the computer automatically compares it with the value of the corresponding model to calculate the deviation value for the wheel alignment. The maintenance personnel can restore the original wheel alignment parameters by correcting according to the prompts of the aligner.
 
  • The wheel alignment plays a very important role in the normal driving of the car. After the car has been running for a period of time, due to various reasons, there will be abnormal tire wear, faster wear of parts, heavy steering wheel, vehicle deviation, increased fuel consumption and other phenomena, which are the reasons for the decline of vehicle performance. To eliminate these phenomena and ensure the stability of the vehicle, the most effective way is to perform wheel alignment. The wheel aligner can not only ensure the normal and safe driving of the vehicle, ensure the stability in straight driving, enhance driving comfort, but also reduce the wear of chassis suspension parts, extend the service life of tires, and save fuel consumption.
  • Where to use Wheel Alignment Required?

  • The driving performance of the vehicle has been affected. The most intuitive feeling of the driver is that the vehicle deviates, and the steering direction does not automatically turn back.
  • Damage to the chassis and suspension of the vehicle caused by the accident.
  • Abnormal and severe tires wear(it needs to be considered whether the abnormal wear is caused by abnormal tire pressure. If there is eccentric wear on one side, there may be a deviation in the camber angle).
  • Parts such as axles and suspensions have been disassembled.
  • Kindly Notice: Generally speaking, wheel alignment shall be carried out for new vehicles after three months of driving; It is recommended that the wheel alignment should be done at least once a year or once after the vehicle has driven 10000 km accumulatively; In case of collision due to tire rotation, wheel positioning shall be carried out in time; If the car is used for a long time, such as taxis, trucks, etc., it is recommended to do four-wheel alignment every six months or three months.and this 3D wheel aligner work with 4 post lift, 2 post lift is unavaiable.

Product Detail

1. Structure



2. Parameter

Measurement repeatability ±0.01° or 0.01mm
ItemPrecision Measurement range Maximum measurement range
Camber Angle±0.015°±0.01°±30°
Rear Angle±0.02±0.01°±30°
Kingpin inward Angle±0.02±0.01°±15°
Kingpin inward Angle±0.02±0.01°±20°
Rear wheel propulsion Angle±0.01±0.01°±6°
Maximum steering Angle±0.01±0.01°±30°
Angle of retreat±0.01±0.01°±6°
Wheel pitch±0.25cm±0.01°3000mm
Wheelbase±0.25cm±0.01°8000mm
Diagonal±2mm±0.3cm12000mm
Wheel radius±2mm±0.3cm700mm

3. Product advantage
     1) Higher precision, more powerful
     2) The accuracy of the equipment can reach 0.01°0.1mm
In addition to the detection of all the traditional general parameters, and can measure wheel deviation, axis deviation and other parameters,
      3) 
Easy to realize the full set out to give you laser locator can not complete many functions.
      4) 
Simple operation(With detailed instructions before delivery)

      5) Low failure rate

      6) The camera responds quickly 


     7) Passed ISO quality system certification and CE certification
    8) 
The appearance and color of the product are optional


4. Standard Accessories
Aluminum alloy beam*1, column*1, aluminum alloy corner plate*2, 4*four jig. Orientation fixing bracket *1 . Front and rear wheel stop *4. Computer host *1 . Monitor standard 18.5 inches, optional (24 inches) keyboard *1, 1*mouse, complete wiring harness *1 set, beam connection bracket *1 piece, column cap *1, 4* jig hanger


Company Information

Certificate

Packing&Delivery



Q&A


1. Why choose us?
1. Patented Product
2. Only professional cost-effective equipment 
3. Low prices with high quality revenue producing products
4. Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
5. The best customer service. Quick reply within 24 hours and more.
6. Great Warranty


2. How safe are our 3D wheel Alignment/Tyre Balancer/Car lifting Machine?
Our 3D wheel Alignment have been tested and CE and ISO certified for safety . They also meet the American and Australian Standard.

3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.

4. Are our 3D wheel Alignment/Tyre Balancer/Car lifting Machine designed for commercial use?
All of our 3D wheel Alignment/Tyre Balancer/Car lifting Machine can be used in commercial applications without any problems.

5. Do you offer any custom designs?
Yes,we provide OEM/ODM services to top range partners.Produce a superior product for you by your designs

 
Product Tag:
Related categories:
Scroll to Top