IH end-suction pump is single-stage single-suction (axial suction) cantilever centrifugal pumps, conveying corrosive liquid with viscosity similar to water without solid particles. Mark, rated performance and size in accordance with international standards ISO2858, with characteristics of a wide range of performance, high efficiency and easy maintenance, the efficiency of an average 5 percent up compared with F-type pump, is the international promotion of energy-saving products.
Pump Speed | 1450 and 2950rpm; |
Motor Voltage | 380V/415V, 3.3KV, 6KV and 10KV; |
Caliber | 50-400mm;(flange dimensions conform GB/T17241.6-1998) |
Flow range | 6-1000m3 / hr |
Head range | 6-130m; |
Temperature range | Medium maximum temperature ≤170'C, ambient temperature ≤60'C; |
Maximum operating pressure (inlet pressure + pump pressure) | 1.0Mpa (G) (Hsp75m) or 1.6Mpa (G) (Hsp75m);Special configuration of up to 2.5Mpa (G); |
Transmission medium | Water or other liquids physical and chemical properties similar to water; |
Seal plumbing parts | No installment when inlet pressure above 0.03Mpa (G) |
Structural Design | 29 basic types, of which 22 pairs speed (1450rpm, 2900rpm) through A, B with two forms of the impeller diameter cutting variants, reaching 112 specifications. |
Professional cooperation agencies