Size | 230*2.2*1.7*40*30T+3 | |
Machine | Popular for Multi Rip Saw | |
Avantage | Long life, smooth cutting edge, low noise. | |
application | Cut fresh wood into slices | |
Logo | Can put customer's brand or our brand |
If the saw blade diameter is greater than 500mm, we will use a wooden box for packaging, and air cushion film inside and around the wooden box for shockproof.
Our company procucts have been export to europe,America,Southeast Asia ,Middle East and other regions
We also can customize all kinds of cemented carbides products according to your drawing and samples.
We will always provide you our best product and service.
1. The alloy head of the tungsten carbide circular saw blade has a sharp and sensitive edge, so the alloy head must be carefully protected from damage during the movement, installation and removal of the saw blade.
2. Before the saw blade is installed, the sundries on the main shaft and flange must be removed. The surface of the flange should be flat, clean and perpendicular to the shaft.
3. Use the largest possible flange to make the operation of the saw blade more stable. The size of the flange should be consistent. The size of the flange is 1/3 of the diameter of the saw blade for better sawing effect.
4. After the saw blade is installed smoothly, it should run idle for 30 seconds, and start cutting after confirming that everything is normal.
5. When installing the saw blade, the flange nut must be moderately tight. If the saw blade is too loose, it will slip when rotating and cutting. If the saw blade is too tight, internal damage or deformation will affect the cutting effect.
6. It is necessary to regularly remove the resin, debris and other sundries accumulated on the side of the saw teeth and saw board, because the accumulation of adhesives will increase the resistance and cause high energy consumption (in extreme cases, it will cause the motor of the machine to be burned) and Rough cutting quality. If the cutting edge is blunt at the same time, it may cause damage to the sawtooth.
1: Could I order one piece for sample to test the quality?
Yes, We recommend to check the sample before order. Please inquiry us the Customer servicer, ,size,tree species, wood diameter, length, opening specificationsand etc.