Theaoson 400ml Fast Drying Frosted Glass Spray Paint for Cars

Min.Order: 7,500

Product origin: Shaoguan, Guangdong, China

Infringement complaint:

Complaint

US$ 0.4 ~ 1.45

Description

OEM ODM 400ml fast drying frosted glass spray paint for cars

Description	Picture	Specification
Theaoson frosted glass Spray Paint		Size	OEM
		Gross Weight	Customized
		Net Weight	Customized
		Rate of Spray	≥97%
		Internal pressure(50ºC)	≤0.7MPa
		Filling rate	70-85%
		Paint finish appearance	The color is uniform and smooth
		Lustre(60°)	Gloss≥80%,Matt≤10%
		Surface drying time	<15 min
		Actual drying time	<12 min
		Hardness	≥HB
		Adhesion	≤2
		Water Resistance	48 hours immersion does not bubble, does not fall off, the paint film slightly whitens in 2H recovery

Theaoson water-based spray paint is composed of aerosol cans, aerosol valves, paint and spray agent. It is widely used in the following fields: repairing paint defects, molds, industrial machinery, buildings, steel structures, advertising, marking, graffiti and so on.

Features

1.Fast drying
2.Colorful and easy to use
3.Full paint film and high gloss
4.Strong adhesion

Application

It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions

Instructions

Construction environment

Temperature of the container	+5ºC~+35ºC
Environment temperature	+5ºC~+35ºC
Environment relative humidity	30%~75%

Remark: the best material liquid temperature is +20 ºC, environment humidity less than 60%. If the temperature and humidity exceed the specified range, the temperature and humidity should be reworked within the suitable range.

Base material to prepare

Clean the oil, dust and water stains thoroughly before use, and polish or spray primer on the base material if necessary.

Usage

Before use, you must shake up, down, left, and right, and continue to shake the can for about 2 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even.

1.First spray on a small area of the test panel to confirm the accuracy of the selected color;
2.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the
spray head back and forth;
3.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180° and spray it
again.
4.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray
head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.

Finishing work:
1.After spraying, the sample should be placed in a clean and ventilated environment for about 12
hours;
2.If not sprayed, the remaining material must be stored at room temperature and protected from
light.

Ending working

After spraying, it should be placed in a clean and ventilated environment for about 12 hours.
If it is not sprayed, the remaining material needs to be kept away from the light, and avoid being near fire sources.

Technology Specification

Parameter		Unit	In 23 ºC and 60% relative humidity
Paint film appearance		-	The color is uniform and smooth
Drying time	Surface dry	Minute	<15
Drying time	Actual dry	Minute	<12
Hardness		Level	≥HB
Adhesion		Level	≤2
Rate of spray		%	≥97
Internal pressure, 50ºC		MPa	About 0.7

Remark: all the above data are obtained from our laboratory tests according to BB/T 0047-2007 "Aerosol Paint" standard, the test results depend on external conditions, use methods and tools. In order to achieve better use effect, it is recommended to strictly follow the method of use.

The solution of normal problem

Paint film whitening: it is recommended to avoid the following day after rain (especially high

temperature and wet weather) and continuous rain.
2. Shut up: shake evenly and spray for 3 seconds or change nozzle.
3. Spray up: low temperatures suggest using 50 ºC warm water to heat up, one-time finish spray,
spray avoid angle 45 degrees;
4. Flow: use the correct spraying distance (15-25cm) and spray movement speed (30-60cm/s) to
avoid a thick spray.
5. Bite bottom: remove the bottom part of the bite, fill the bottom ash, and then spray the paint after
the coating is dry and flat.
Attention
1.Keep away from children, please work in the air. If swallowed, you should immediately cause
vomiting and seek medical advice.
2.Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45 °.
3.Flammable, pressure vessel, do not use near fire source.
4.The weight changes over time, which is normal, and the attrition rate is less than 2% per year.

Why choose us:
Theaoson is a listed company founded in 2010. We are one of the largest aerosol manufacturer in China and we are listed company. We dedicated to research, development, production and sales to aerosol in car care, beauty care, household, industries and disinfection.

Please allow me to have a brief introduction to the advantages of our aerosol products:

1. The factory environment is as beautiful and modern as gardens.
2. Area: 120,000 square meters. Located in Fine Chemical Science Park which is according to Chinese government's requirement for the chemical production base.
3. We mainly focus on aerosol in car care, beauty care, household, disinfection and industrial aspects.
4. Yearly output: 300 million cans. Lead time for new orders is 20-25 days, for repeated orders is 18-20 days.
5. Equipped with 25 world-leading production lines and professional testing instruments imported from Germany.
6. Adopt the advanced 6S lean management and the "five practice" of corporate cultureand management philosophy.
7. Team: R&D, QC and production teams are 24 years of industry experience.
8. Certificates: "Top 100 Enterprises in Guangdong Province" "AEO Advanced Certificate" "Production License for Dangerous Chemical Products", "Sanitation License for Disinfection Products", "Guangdong Pollutant Discharge Permit", CE, SGS, ISO9001, ISO14001, ROHS, etc.