Users Using Linear Shaker for The First Time Should Pay Attention to The Following Points

Linear vibrating screen is double vibration motor drive, when two vibration motors do synchronous, reverse rotation, its eccentric block generated vibration force in parallel to the direction of the motor axis offset each other, in the direction perpendicular to the motor shaft stacked as a resultant, so the running track of the linear screen for a straight line. Two motor shaft relative screen surface has a dip Angle, under the combined force of vibration force and material since gravity, the material is thrown up on the screen surface for linear motion, so as to achieve the purpose of screening and classification of materials.



When the user uses the linear screen for the first time, the user must operate in accordance with the requirements of the linear screen instruction manual. Then, the user needs to pay attention to those details when using the linear screen for the first time?



1, linear vibrating screen is generally three-phase electricity, power supply should be correctly connected, strictly prohibited phase operation.



2, linear vibrating screen in the process of transportation, in order to increase its rigid strength will add transport support, the user must remove the transport support before the boot, otherwise it will affect the vibration of the vibrating screen machine, serious damage to the machine.



3, the bottom of the linear vibrating screen is firmly seated, but in order to ensure that the screen body in balance, must be fixed with bolts, the same side before and after the support seat height difference is consistent, the same end (feeding end or discharging end) on both sides of the support seat plate in the same horizontal plane, the error is within 2mm, that is, the linear vibrating screen is in a horizontal state.


4, linear vibrating screen frame is made of smaller deformation of wood, used to keep the screen flat tensioning, to achieve normal screening. If the proportion is large or the output can be used when the metal screen frame screen in the machine, you need to pay attention to check whether the screen is paved.



5, the connection of all parts of the linear vibrating screen machine must be firm and reliable, all bolts shall not have any loose, the parts shall not have any abnormal sound, sieve machine vibration part and the small gap between the surrounding fixed objects for 30-50mm to check the fuselage frame of the ring screw is locked.



6. After starting the machine for the first time, pay attention to the material track, and adjust the running track to the shape you need according to the screening material.



The linear vibrating screen produced by Xinxiang Tianfeng machinery factory is widely used in chemical industry, food, plastic, medicine, metallurgy, glass, grain, fertilizer, abrasive, ceramic lamp industry dry powder or granular material screening, screening precision is high, large processing capacity, simple structure, less energy consumption, low noise, long service life of the screen, good sealing, very little dust spilling scattered, convenient maintenance, It can be used for automation in assembly line production. If you have this need, welcome to inquire.
Applicable industries

It is divided into dry powder granular type and liquid type.
Chemical sieve: special sieve for resin, pigment, medicine, medicine, cosmetics, fire suppressant, plastic, rubber and other ceramics and refractory materials.
Special screens for ceramic refractory materials: abrasives, abrasives, glass, alumina, ceramic slurry, clay slurry, refractories, quartz sand, titanium powder, powder, etc.
Food specific screen: sugar, monosodium glutamate, salt, fruit juice, starch, milk powder, grain, soybean milk, egg powder, various protein powder, etc.
Metallurgical special screen: ore, titanium oxide, zinc oxide, casting sand, metallurgical powder superhard alloy, electromagnetic materials, aluminum powder, various metal particles, etc.
Others: carbon black, carbon, cosolvent, activated carbon, wood powder pearl, etc.
Liquid special screen: paint, paint, and viscous liquid.

Technical parameters of linear vibrating screen

Guidance on use and maintenance of linear vibrating screen

1. The machine shall be equipped with electrical protection device.
2. At the initial operation stage of the machine, the anchor bolts shall be checked at least once a day to prevent looseness.
3. When the motor rotation direction does not meet the requirements, adjust the power supply phase sequence.
4. The motor shall be well lubricated, and lithium base grease (ZL-3) shall be added once every two weeks of operation. When refueling, an appropriate amount of lithium base grease shall be added through the oil cup. When sealed bearings are used, the motor is not equipped with oil cups.
5. After the machine has been running for 1500 hours, check the bearing and replace it immediately in case of serious damage.
6. When the machine is used again after being stopped for a long time, the insulation resistance should be measured, which should be greater than 0.5 megohm for 500 volt megger measurement.


Daily maintenance of linear vibrating screen

1. Before starting:
(1) Check whether the coarse mesh and fine mesh are damaged;
(2) Check whether the transportation support is removed.
2. At startup:
(1) Pay attention to whether there is abnormal noise;
(2) Whether the current is stable;
(3) Whether the vibration is abnormal.
3. After use: clean up after each use.

Regular maintenance of linear vibrating screen

Regularly check the coarse screen, fine screen and spring for fatigue and damage, and check whether all parts of the machine body are damaged due to vibration. The parts that need to be lubricated must be lubricated.




Applicable industries

       Chemical industry: resin powder, pigment, washing powder, micro powder, paint, soda ash, lemon powder, rubber, plastic, etc.
       Abrasives, ceramic industry: alumina, quartz sand, mud, sprayed soil particles, etc.
       Food industry: sugar, salt, alkali, monosodium glutamate, milk powder, soy milk, yeast, fruit juice, soy sauce, vinegar, etc.
       Paper industry: coating paint, clay mud, black and white liquid, waste liquid, papermaking liquid, wastewater recycling, etc.
       Metallurgical industry: titanium oxide, zinc oxide, electromagnetic materials, metal powder, electrode powder, etc.
       Pharmaceutical industry: Chinese medicine powder, Chinese medicine liquid, Western medicine powder, Western medicine liquid, Chinese and Western medicine granules, etc.
       Environmental protection: garbage, human and animal excrement, and urine, waste oil, food wastewater, wastewater processing, etc.



 

 

 

 

 

 

 

 

After you place the order and pay the deposit, we will start to arrange the production and contact the ocean freight transportation agency to reserve the position. Two days before the end of production, you need to complete the final payment. Then, we inform the ocean cargo transportation agent company that it is ready to come to the factory to pull the goods to the port. On the day of delivery, we will send the customer the factory video and pictures, and mark the corresponding English name of each product and product parts with a marker to prevent the customer from not knowing what each part is after receiving the goods. At the same time, we will put the English version of the product instructions in the cargo box. We generally select freight forwarders with preferential prices for customers to deliver goods for you. The shipping method can be FOB or CIF. You can also choose EXW, and then contact the goods agent company yourself.

 

 
FAQ

1. Who are we?
Our headquarters is located in Henan, China, and our factory was established in 2002. At present, there are more than 100 workers, technical engineers, foreign trade sales personnel, and administrative personnel. The factory covers an area of more than 2000 square kilometers and is mainly engaged in vibrating screening and conveying and feeding equipment.

2. How do we guarantee quality?

Always provide pre-production samples before mass production; Always carry out a final inspection before shipment.
3. What can you buy from us?

You can purchase a vibrating screen, roller screens, rotary screens, vacuum conveyors, mixer, and customized vibrating machinery and conveying equipment in our factory.

4. What are our strengths?

As one of the old enterprises in the screening industry, Tianfeng has provided a large number of screening equipment and systems at home and abroad. Mass production, rapid delivery, stable quality, affordable price, and excellent after-sales service have become the symbols of Tianfeng.

5. What services can we provide?

Accepted delivery conditions: FOB, CFR, CIF, EXW, CIP, FCA, CPT, DDP, express;
Accepted payment currency: USD, EUR, RMB;
Type of payment accepted: telegraphic transfer, letter of credit, express remittance, credit card, PayPal, Western Union remittance, cash, custody;
Oral: English, Chinese, French.

6. What information do we need to help you choose a perfect machine?

-Name and characteristics of raw materials.
-Purpose of use: remove impurities, filter, and grade.
-Processing capacity: kg/h, L/h.
-Raw material size: (mesh or mm).
-How many floors do you need?
-Voltage, frequency, phase (single-phase or three-phase) Note: You'd better send us the relevant pictures or materials you want to filter, which can ensure that we recommend the appropriate machine for you.