Description
Water Oil Gas Industrial leak pipe repair pvc pipe fix under armour industrial pipe repair kit 75MM X3.6M
1. Product Description
Ansen pipe repair bandage is a fast curing tape composed of flexible fiberglass mesh impregnated with water activated polyurethane resin. Our repair bandage is mainly used to repair, reinforce and protect oil, gas, water etc pipeline.
It adheres to metal, plaster, pvc, copper, rubber, concrete, wood, ceramic etc. It can be applied on cracked, fractured, corroded, damaged and leaking pipes, around difficult shapes including straight lengths, tee and elbow joints. 2. Operation 1.Shut off the pressure and isolate leak. Clean, degrease and abrade substrate around leak site.
2.Work putty until a uniform mixture is evident.3.Apply mixed putty immediately to leak site. Firmly press putty into defect.
4.Put on gloves supplied with the Pipe Repair Bandage. Immerse Bandage in water or place under running tap water for 10 secs.
5.Wrap the Bandage tautly around the leak site extending 50mm either side of damaged area.
6.Smooth the resin as it foams during curing and work resin into the base fabric in a 'tightening motion'. Restore pipe to service once Bandage is cured.
3. Specification Product Name | Model No. | Size | Packing |
Pipe Repair Bandage | PR002 | 50mm x 3.6m (2" x 12´) | 10bags×10boxes/ctn |
PR003 | 75mm x 3.6m (3" x 12´) | 10bags×10boxes/ctn |
PR004 | 100mm x 3.6m (4" x 12´) | 10bags×10boxes/ctn |
PR005 | 125mm x 3.6m (5" x 12´) | 10bags×9boxes/ctn |
PR006 | 150mm x 3.6m (6" x 12´) | 10bags×9boxes/ctn |
4. Advantage and Disadvantage Advantages | Technical Data |
Emergency Water Activated Fiberglass Fix Pipe Repair Wrap 1. Catalyst: Water 2. Resin Makeup: Polyurethane 3. Heat Resistance: 180°C 4. Pressure: 450 PSI 5. Bonds: Copper pipe, PVC, polypipe, metal, fibreglass 6. Set Time: 20 - 30 minutes, sets under water 7. Chemical resistance: Most diluted chemicals and fuels | 1.Useable life: …2-3 minutes, depending on temperature of water and pipework 2. Intial cure time: … 5 minutes 3. Full cure time: … 30minutes 4. Shore D hardness: … 70 5. Tensile strength: … 30-35Mpa 6. Tensile modulus: … 7.5Gpa 7. Maximum service temperature: 150°C 8. Pressure resistance: … 450psi (Min wrapping 12 layers around cracked/leaking area) |
5.PackagesEach bandage is wrapped individually in a bag with outer package
Aluminum Plastic Bag
Hard Inner Box
Outside Corrugated Carton
10bags/box, 9boxes/ctn.
We support shipping in Air or Ocean way, 7-15 working days after payment.
6. Company Information