ACSR Type AC Aluminium Conductors Steel Reinforced (GOST 839-80)

ACSR, Type Asx, All-Greased Aluminium Conductors Steel Reinforced (GOST 839-80)         
             
ACSR, Type ASX, Aluminium Conductors Steel Reinforced (GOST 839-80)                     
1. Applications                     
ACSR have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.                     
                     
2. Service Performance                     
(1). The permissible long-time operating temperature for aerial conductor is 70oC.                     
(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.                     
(3). When connecting conductors, the conductor beside the connecting tube cant be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.                     
(4). Under installaion, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.                     
                     
3. Product Performance                                                           
(1). The electrical performance of AAC and ACSR is indicated in DCΩ /km(20oC). The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ . M of international standard value.                     
(2). The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.                     
A. The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min. Tensile strength of corresponding size specified in the standard for aluminum wire.                     
B. The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.                     
                     
4. Referred Standard                     
BoanCable is able to manufacture ACSR according to different stands, as below:ACSR, Type SX, All-greased Aluminium Conductors Steel Reinforced (GOST 839-80)                     
(1). ASTM B 232/B 232M: Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)                     
(2). AS 3607: Conductors-Bare overhead, aluminium and aluminium alloy-Steel reinforced                     
(3). IEC 61089: Round wire concentric lay overhead electrical conductors                     
(4). DIN 48.204: Steel reinforced aluminium stranded conductor                     
(5). BS 215-2: Aluminium conductors and aluminium conductors, steel-reinforced-For overhead power transmission-Part 2: Aluminium conductors, steel-reinforced                     
(6). BS EN 50182: Conductors for overhead lines-Round wire concentric lay stranded conductors                    (7). GOST 839-80                     

Standard
GOST 839-80