50mm Plastic Super Intalox Saddles Random Tower Packing

Min.Order: 1
Product origin: Pingxiang, Jiangxi, China
Infringement complaint: complaintComplaint
US$ 200 ~ 300

Description

Product's Introduction

Plastic packing is made of heat resistant and chemical resistant plastic. Plastic filler materials include: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC), and polyvinylidene fluoride (PVDF), etc. . It has good corrosion resistance, large void ratio, large flux, low resistance, low energy consumption, low operating cost, light weight, convenient loading and unloading, and can be reused. It is especially suitable for medium and low temperature (60-280 °C) stripping, absorption and washing towers in petroleum, chemical, chlor-alkali, natural gas and environmental protection industries.

 

The Intalox Saddle Ring is an improvement on the saddle ring, It is characterized by improving the fan-shaped curved surface into a shell-like curved surface with serrated edges, and increasing the opening to communicate the inner and outer surfaces of the filler, increasing the free passage of the fluid, facilitating the distribution of the liquid and the surface renewal, so the processing capacity is better than the saddle ring, of low pressure so transfer performance has improved.
 

Technical Data

Product Name

Plastic Super Intalox Saddle

Material

PP/RPP/PVC/CPVC/PVDF,etc

Life Span

>3 years

Size
Inch/mm

Surface Area
m2/m3

Void Volume
%

Packing Number
pieces/ m3

Packing Density
Kg/m3

Dry Packing Factor m-1

1"

25×12.5×1.2

260

90

51200

92

390

1-1/2"

38×19×1.2

178

96

25200

75

201

2"

50×25×1.5

168

97

6300

76

184

3"

76×38×2.6

130

98

3700

64

138

 

Feature

Large porosity, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. 

Advantage

1. The special structure makes it have large circulation, low pressure drop, good anti-impaction capability.
2. Strong resistance to chemical corrosion, large void ratio, energy saving, low operation cost and easy to be load and unload.

Application

Plastic random packing maximum use temperature of 280 degrees Celsius, widely used in petroleum, chemicals, chlor-alkali, gas and environmental protection industries packing tower.

 


Physical & Chemical Properties

Plastic random tower packing are tower packing made of Polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF), polytetrafluoroethylene (PTFE), etc. It has high void ratio, low pressure drop, low mass transfer unit height, high flood point, sufficient gas-liquid contact, small specific gravity and high heat and mass transfer efficiency. These plastic random packings can be operated at temperatures ranging from 60 to 280 degrees Celsius.

 

 
Scroll to Top