Complaint
| Model | Input Voltage | Power (KW) | Drive Capacity (KVA) | Output Current (A) | Applicable Motor (KW) |
| 00E2004V2T | Sing/three phase 220V, 50Hz | 0.4 | 1.0 | 2.5 | 0.4 |
| 00E2007V2T | Sing/three phase 220V, 50Hz | 0.75 | 2.0 | 5.0 | 0.75 |
| 00E2015V2T | Sing/three phase 220V, 50Hz | 1.5 | 2.8 | 7.0 | 1.5 |
| 00E2022V2T | Sing/three phase 220V, 50Hz | 2.2 | 4.0 | 10 | 2.2 |
| 00E3007V3T | 3ф380V 50Hz | 0.75 | 2.2 | 2.7 | 0.75 |
| 00E3015V3T | 3ф380V 50Hz | 1.5 | 3.2 | 4.0 | 1.5 |
| 00E3022V3T | 3ф380V 50Hz | 2.2 | 4.0 | 5.0 | 2.2 |
| 00E3040V3T | 3ф380V 50Hz | 4.0 | 6.8 | 8.5 | 4.0 |
| 00E3055V3T | 3ф380V 50Hz | 5.5 | 10 | 12.5 | 5.5 |
| 00E3075V3T | 3ф380V 50Hz | 7.5 | 14 | 17.5 | 7.5 |
| 00E3110V3T | 3ф380V 50Hz | 11 | 19 | 24 | 11 |
| 00E3150V3T | 3ф380V 50Hz | 15 | 26 | 33 | 15 |
| 00E3185V3T | 3ф380V 50Hz | 18.5 | 32 | 40 | 18.5 |
| 00E3220V3T | 3ф380V 50Hz | 22 | 37 | 47 | 22 |
| 00E3300V3T | 3ф380V 50Hz | 30 | 52 | 65 | 45 |
| 00E3370V3T | 3ф380V 50Hz | 37 | 64 | 80 | 37 |
| 00E3450V3T | 3ф380V 50Hz | 45 | 72 | 91 | 45 |
| 00E3550V3T | 3ф380V 50Hz | 55 | 84 | 110 | 55 |
| 00E3750V3T | 3ф380V 50Hz | 75 | 116 | 152 | 75 |
| 00E3900V3T | 3ф380V 50Hz | 90 | 134 | 176 | 90 |
| 00E31100V3T | 3ф380V 50Hz | 110 | 160 | 210 | 110 |
| 00E31320V3T | 3ф380V 50Hz | 132 | 193 | 253 | 132 |
| 00E31600V3T | 3ф380V 50Hz | 160 | 230 | 304 | 160 |
| 00E31850V3T | 3ф380V 50Hz | 185 | 260 | 340 | 185 |
| 00E32000V3T | 3ф380V 50Hz | 200 | 290 | 380 | 200 |
| 00E32200V3T | 3ф380V 50Hz | 220 | 325 | 426 | 220 |
| 00E32500V3T | 3ф380V 50Hz | 250 | 381 | 500 | 250 |
| 00E32800V3T | 3ф380V 50Hz | 280 | 427 | 560 | 280 |
| 00E33150V3T | 3ф380V 50Hz | 315 | 460 | 605 | 315 |
| Item | GVC-E/F/L | |
| Control mode | SPWM | |
| Input power supply | 380V power supply: 340-460V; 220V power supply: 180-250V | |
| 5-bit digital display and status indicator lamp | Messages about frequency, current, rotation speed, voltage, counter, temperature, FWD & REV status and fault are indicated. | |
| Communication control | Rs485 | |
| Operation temperature | -10~40ºC | |
| Humidity | RH 0-95% (no condensation) | |
| Vibration | Below 0.5G | |
| Frequency control | Range | 0.10-400.00Hz |
| Accuracy | Digital mode: 0.01% (-10~40ºC); simulation mode: 0.1% (25±10ºC) | |
| Set resolution | Digital mode: 0.01Hz; simulation mode: 1% of maximum operation frequency. | |
| Output resolution | 0.01Hz | |
| Keyboard setting mode | Directly set through | |
| Simulation setting mode | External voltage 0-5V, 0-10V, 4-20mA, 0-20mA. | |
| Other GVCnctions | Lower limit of frequency, start frequency, stop frequency; the three hopping frequencies can be set separately | |
| General control | Acceleration/deceleration control | 4 segments of acceleration/deceleration time (0.1-6500s) optional |
| V/F curve | V/F curve can be set at will | |
| Torque control | Toque promotion can be set (10.0% maximum). The start torque at 1.0 Hz may reach 150% | |
| Multi-GVCnction input terminal | 6 multi-GVCnction input terminal performing the GVCnctions of 8-segment speed control, program operation, 4-segment acceleration/deceleration switching, UP/DOWN mechanism, counting and external emergency stop etc. | |
| Multi-GVCnction output terminal | 5 multi-GVCnction output terminals performing the indication and alarm of IN SERVICE, zero speed, counter, external abnormality and program operation etc. | |
| Other GVCnctions | AVR, decelerate-to-stop or free stop, DC braking, auto reset & restart, frequency tracking, PLC program control, lateral movement control, stretching control auto energy-saving operation, carrier wave adjustable (up to 20KHz) etc. | |
| Protection GVCnction | Low voltage | 220V line: DC voltage <200V; 380V line: DC voltage <400V |
| Overvoltage | 220V line: DC voltage >400V; 380V line: DC voltage >800V | |
| Restart after prompt stop | Restarting is available through frequency tracking after the prompt stop | |
| Under-speed prevention | Under-speed prevention during acceleration/deceleration | |
| Short circuit at output terminal | Electronic line protection | |
| Other GVCnctions | Radiation fin overheat protection, REV limitation, failure resetting, parameter locking PID, one-for-several | |
Company Information:
GWIEC attaches great importance of Product Quality and Safety Production Process. Our company has passed ISO Certificates. Our products are listed by CQC, CE, RoHS certificates.
GWIEC will insist her belief "Quality is Brand"to bring "Better Quality, Better Service and Better Price"to customers, our goal is to maximize your profit and bring mutual success to both of us!
Certifications:
GWIEC attaches great importance of Product Quality and Safety Production Process. Our company has passed ISO Certificates. Our products are listed by CQC, CE, RoHS certificates. we supply for global factories and distributors which are experienced in filed electric products and green energy. Just like Europe, South America, Russia, Asia etc.
OUR TEAM
FAQ
1.Could I put my own logo on it?
> Sure, customers' logo can be made by laser, engraved, embossed, transfer printing etc.
2.Should I pay extra for logo printing ?
> Normally usd 0.017/per color,according to the actual situation.
3.How about the quality ?
> Acquire the CE & SGS Certification.
> 100% QC in produce process and before package.
4.Could I buy 1pc sample first and small order ?
> Of course, support sample order and small order, especially for new customers under certain condition
5.How much for 1pc sample ?
>Some cheap ones may free for 1pcs but need to see the actual stock.
6.If I have my thoughts, do you have person to design according to my concept?
> Certainly,our design team is willing to do for you.
7.How long to make a sample?
> 2-5 days which depends on the samples' complexity.
8.Is the sample fee refundable or not?
> Sure, refundable once order confirmed.
With more than 15 years OEM experience, we can provide professional solutions for customers.
Send your Inquiry Details in the Below, Click "Send" Now!!!
