Cell phone Amplifier Description: 900/1800/2100MHz Indoor 5G Tri-band mobile signal repeater
Frequency Range | Uplink | Downlink |
EGSM 900MHz | 880MHz-915MHz | 925MHz-960MHz |
DCS 1800MHz | 1735MHz-1765MHz | 1830Mhz-1860MHz |
WCDMA 2100MHz | 1920MHz-1980MHz | 2110MHz-2170MHz |
Max. Gain | 70dB ±1.5dB | 75dB±1.5dB |
Max. Output Power | 20dBm±1.5dB | 17dBm±1.5dB |
Band Width | Wide Band | |
Manual Gain Contro | 31dB | |
ALC (Automatic Level Control) | >25dB | |
Ripple in Band | ≤ 8dB | |
Noise Figure | ≤ 6dB | |
Intermodulation | ≤ -40dBc | |
Frequency stability | ≤ 0.01ppm | |
MTBF | > 50000 hours | |
Operating Temperature | -5 ~ 55 ºC | |
Environmental Conditions | IP40 | |
Humidity | 5%~95% | |
Impedance | 50 Ω (Nominal) | |
Isolation | >90dB | |
PCDE | ≤ -38 dBc | |
Noise Figure | < 5 dB | |
V.S.W.R | ≤ 2.0 | |
Time Delay | ≤ 1.5μs | |
Power Supply | Input AC110~240V, Output DC24V/2.5A | |
AGC Alarm | Alarm when ALC control 5dB-10dB | |
ISO Alarm | Alarm when ALC control 20dB-25dB, Then Repeater will Auto Shut Down. Auto restart after two minutes. | |
RF Connector | N-Female | |
Switch | Manual Gain Control Switch | |
Cooling | Heatsink Convection cooling | |
Dimensions (W x H x D) | 195*180*55mm(without connector) | |
Weight | 4.0 kg |
All specifications of PA can be customized based on customer requirement.
Easy Installation |
1. Fix up outdoor antenna reception on housetop and point to signal tower. |
2. Connect outdoor antenna to "BTS" Port on the Booster through cable. |
3. Connect indoor antenna(s) to "User" or "Mobile" Port on the Booster directly or through cable.also. |
4. Plug Power Adaptor into AC power socket and finish installation. |
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.