| Function | Description |
| Roll Call Mode | When the return time interval is set to 0 seconds, the terminal is in roll call mode, the platform rolls name, uploads the latest positioning point, and the factory default is roll call mode. |
| Tracking Mode | When the return time interval is set to 1-60 seconds, the terminal is in tracking mode, and the positioning information such as latitude and longitude is uploaded according to the set return time interval. |
| Timing Mode | When the return time is set to 61-999999 seconds, the terminal will upload the positioning information such as latitude and longitude according to the set return time interval in timing mode. |
| Alarm Wake-up Mode | Automatically wake up at the set time, upload positioning information such as latitude and longitude |
| Timer Wake-up Mode | Set the time interval, the device uploads positioning information such as latitude and longitude according to the time interval |
| Lighting Alarm | When the terminal changes from no light to visible light, and when the alarm switch is removed, it will report a light-sensing alarm. Remove the alarm switch is on by default |
| Over-speed Alarm | Set the maximum speed limit value on the platform or SMS, when the GPS speed is more than the value, the device will upload a alarm to the server |
| Blind area uploading data | The terminal is located or the terminal is not located but has alarm data, and the terminal is not online. At this time, the data will be stored. After there is a signal, it will go online normally and upload and store the data. |
| EPO assisted location function | The terminal supports the EPO function to assist positioning to enhance the positioning effect. |
| Inflection upload | When the angle of the vehicle turns is more than a certain angle, the device will upload a position information to the platform to optimize the trajectory. |
| Upgrade remotely | Upgrade Housekeeper remote upgrade. |
Complaint
