Complaint
| Steel Grade | C | Si | Mn | Cr | Mo | V | P | S |
| H10/SKD7/1.2365/4Cr5Mo2V | 0.35-0.45 | 0.8-1.25 | 0.2-0.7 | 3-3.75 | 2-3 | 0.25-0.75 | ≤0.03 | ≤0.03 |
| 1.2367/4Cr5Mo3V/ | 0.35-0.4 | 0.3-0.5 | 0.3-0.5 | 4.8-5.2 | 2.7-3.2 | 0.4-0.6 | ≤0.03 | ≤0.02 |
| H11/SKD6/1.2343/4Cr5MoSiV | 0.33-0.43 | 0.80-125 | 0.20-0.60 | 4.75-5.50 | 1.10-1.60 | 0.30-0.60 | ≤0.03 | ≤0.03 |
| H13/SKD61/1.2344/4Cr5MoSiV1 | 0.32-0.45 | 0.08-1.20 | 0.20-0.50 | 4.75-5.50 | 1.10-1.75 | 0.80-1.20 | ≤0.03 | ≤0.03 |
| H21/SKD6/1.2531/SKD5/3Cr2Mo8V | 0.32-0.42 | 0 .8-1.2 | ≤0.5 | ≤0.03 | ≤0.02 | 0.3-0.5 | ≤0.03 | ≤0.02 |
| 3Cr2W8V | 0.26-0.36 | 0.15-0.50 | 0.15-0.40 | 3.00-3.75 | - | 0.30-0.60 | ≤0.030 | ≤0.030 |
| P20+Ni/SKD6/1.2738/3Cr2NiMo | 0.32-0.40 | 0.20-0.40 | 1.10-1.50 | 1.70-2.00 | 0.25-0.40 | - | ≤0.030 | ≤0.030 |
| 3Cr2Mo | 0.28-0.40 | 0.28-0.80 | 0.610-1.00 | 1.40-2.00 | 0.30-0.55 | - | ≤0.030 | ≤0.030 |
| SKD11/Cr12Mo1V/D12/D11 | 1.4-1.6 | ≤0.40 | ≤0.60 | 11.0-13.0 | 0.80-1.20 | 0.20-0 .50 | ≤0.030 | ≤0.030 |
| Cr12Mo1V1/D2/1.2379/ Cr12Mo1V1 | 1.40-1.60 | ≤0.60 | ≤0.60 | 11.00-13.00 | 0.70-1.20 | 0.5-1.10 | ≤0.030 | ≤0.030 |
| Cr12/D3/SKD1/1.2080 | 1.9-2.2 | 0.1-0.6 | 0.2-0.6 | 11.00-13.00 | - | -- | ≤0.030 | ≤0.030 |
| 1.2363/A2/SKD12/Cr5Mo1V | 0.95-1.05 | 0.10-0.40 | 0.40-0.80 | 4.80-5.50 | 0.90-1.20 | 0.15-0.35 | ≤0.003 | ≤0.003 |
| Flat Bar Size | Round Bar Size(mm) | |||
| Thickness | Width | Length | Diameter | Length |
| 10-200 | 155-810 | 2000-6000 | 20-200 | 3000-6000 |
| Product Name | Mould Steel |
| Steel Grade | SKD11 01/SKS3/1.2510 DC53 D65 D3M D3/1.2080 D2/1.2379 D11 D12 M2/SKH51 T1/SKH2 |
| Specification | Round Bar: diameter 6-400mm x Length 3000-9000mm Plate: thickness 6-400mm x width 100-1500mm x Length 2000-6000 |
| Standard | AIS JIS DIN GB EN |
| HS Code | 7228300000 |
| Feature | 1. The carbides are fine, uniform, high toughness, and good plasticity. 2. High hardness, high wear resistance, high heat hardness, high hardenability, and sufficient plasticity and toughness. 3. Good casting, forging, welding, and machinability. |
| Application | 1.Use to create a large cross-section and complex shape of the cold die, and a variety of measuring tools. 2.Commonly used in punching die, stamping die, bending die, drawing die, punch punch, fine mold, and other metal molds. |
| Quenching | First preheat 700 ~ 750ºC, and then heat to 1000 ~ 1050ºC in still air cooling, such as steel thickness of more than 6 inches of heating to 980 ~ 1030ºC in oil hardening better. |
| Tempering | Heat to 150 ~ 200ºC, stay at this temperature, and then cool in still air |
| Hardness | HRC above 61. |
| Annealing | heating to 800 ~ 850ºC, stay at this temperature for 1 ~ 3 hours, in the furnace |
| Forging | 900 ~ 1050ºC. |
| 1.Easy to be machined and ground. The machinability and grind ability are better than SKD11, so the tool life is longer and the machining time is less. |
| 2. The advantages of heat treatment are that the hardening capacity of quenching is higher than that of SKD11, so the defect of insufficient hardness in vacuum heat treatment can be improved. |
| 3. Advantages in wire cutting processing: high-temperature tempering can reduce residual stress and eliminate residual austenite, preventing cracks and deformation caused by wire cutting. |
| 4. Advantages of surface hardening treatment: the surface hardness after surface hardening treatment is higher than that of SKD11, so the mold performance can be improved. |
| 5. Advantages in repairing and welding operations: since the preheating and post-heating temperatures are lower than those of SKD11, it is easier to repair and weld. Features: universal cold die steel, high hardness, high toughness DC53 die steel |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawing
