Coffee Powder Granule Making Machine and Fluid Fluidized Bed Granulator Dryer for Instant Coffee Chemical

Min.Order: 1
Product origin: Zhengzhou, Henan, China
Infringement complaint: complaintComplaint
US$ 8000

Description
Product Description
Fluid bed granulator introduction
Put the powder for granulation or the granular material for coating into the fluidized bed. The cold air enters from the heating chamber at the rear of the main engine. After the primary effect and intermediate effect filter, the heater is heated to the temperature required by the inlet air and then enters the fluidized bed. It is fluidized in the bed, and the binder for granulation is sent to the two-fluid atomizer by the infusion pump, and sprayed to the fluidized material after atomization. The powders bridge each other and gather into granules and grow up or form a film on the material to be coated. After the water volatilizes, it is taken out of the machine by the exhaust air.

Equipment principle

The material is suspended under the action of clean hot air flow (negative pressure) to form a fluidized state, and its surface is in full contact with the hot air, and the heat is evenly heated to a heat exchange state, which has extremely high efficiency.
Equipped with a suitable spray system and further improvements in the functional structure of the fluidized bed, it appropriately exhibits the characteristics of fluidized bed spray drying granulation and coating, that is, it has become a kind of drying, granulation, and coating. Use process equipment
tional structure of the fluidized bed, it appropriately exhibits the characteristics of fluidized bed spray drying granulation and coating, that is, it has become a kind of drying, granulation, and coating. Use process equipment

Detailed Photos


Product Parameters
Item
Unit
FL-3
FL-5
FL-15
FL-30
FL-60
FL-120
 
 
Container
Diameter
mm
300
400
550
700
1000
1200
 
Volume
L
12
22
45
100
220
420
 
Capacity
Min
kg/batch
1.5
4
10
15
30
80
 
Max
kg/batch
4
6
20
45
90
160
 
Steam consumption
kg/batch
15
23
42
70
140
211
 
Steam pressure
Mpa
0.1-0.4
 
Compressed air volume
m3/min
0.9
0.9
0.9
0.9
1
1
 
Fan motor power
kW
3
4
5.5
7.5
11
18.5
 
Temperature
ºC
RT-120
 
Material collection rate
%
>99
 
Operating time
min
15~30 (subject to raw material)
 
Final moisture content
%
0.2
 
Noise
dB
≤75
 
Weight
kg
500
700
900
1000
1100
1300
 
Dimension
m
1*0.6*2.1
1.2*0.7*2.3
1.25*0.9*2.5
1.6*1.1*2.5
1.85*1.4*3
2.2*1.65*3.3
 
Company Profile

Product Tag:
Related categories:
Scroll to Top