AC and DC High Voltage Dry Type Test Transformer

Min.Order: 1
Product origin: Liaocheng, Shandong, China
Infringement complaint: complaintComplaint
US$ 3699 ~ 5799

Description
Company Introduction
  Shandong Fuda Transformer Co., Ltd. is a national high-tech enterprise specializing in the design, production, development and sales of power transformers and their supporting products. The company has established a good internal mechanism, a complete technical research and development force and a mature after-sales service team. The excellent working environment and good incentive mechanism have attracted a number of high-quality, high-level and high-efficiency talents. At present, there are 160 employees, including more than 10 senior engineers, more than 30 intermediate engineers, 5 registered power engineers, and 5 national second-level construction engineers. In addition, the company's grassroots employees have received professional job training, and all teams and departments have experienced technicians, which provides a solid guarantee for the process and quality of products. Since its establishment, the company has been implementing modern management and technology research and development upgrading.


Product description
The transformer rely on air convection for cooling. With the increasing of urban power load, the crowded residentialand high-rise buildings, underground structures, there is an urgent need in transformer with these advantages: furtherload center, preventing fire or explosion and superior environmental performance,and dry-type transformer meet theserequirements.


Product features
The transformer is of high mechanical strength, ant-short circuit ability ,better moisture resistance and can be run at100% humidity without preheating treatment before operation, intermitent operation without moisture protection. Thereare advantages :small size, light weight, no cracking, no moire surface, partial discharge low,high insulation level, gooolightning shock resistant performance,free maintenance, strong heat dissipation capabilty, running 150% rated load inthe forced air cooling conditions , flame retardant, explosion-proof, no polution, and directly installed in the load center
The dry-type transformer is mainly composed of iron core composed of silicon steel sheet and coil cast with epoxy resin. An insulating cylinder is placed between the high and low voltage coils to increase electrical insulation, and the coil is supported and restrained by cushion blocks. The fasteners of its parts overlap have anti-loosening performance.
Its advantages can be broadly divided into the following points:
Safe, fireproof, pollution-free, and can be directly operated in the load center;
Adopt domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability and long service life;Low loss, low noise, obvious energy-saving effect, maintenance-free;
Good heat dissipation performance, strong overload capacity, and can improve capacity operation when forced air cooling;Good moisture-proof performance, suitable for operation in high humidity and other harsh environments;
The dry-type transformer can be equipped with a complete temperature detection and protection system. Intelligent signal temperature control system is adopted, which can automatically detect and patrol display the working temperature of each three-phase winding, automatically start and stop the fan, and have alarm, trip and other function settings


Scope of application
The transfomer is suitable for modern commercial center, residential area, underground of high-rise buildings andother public places such as high fire prevention requirements.


Test
Transformer ratio and connection
Measurement of load losses and short circuit impedance.
Measurement of no-load losses.
Separate source withstand voltage test
Induced over-voltage test
Temperature rise test
Lighting impulse withstand voltage test
Measurement of partial discharge
Other transformers like rectifier transformer are also available on request.
 
FAQ:
 1.Q: Are you manufacturer?
   A: Yes, we are manufacturer. Our factory is in Liaocheng, Shandong Province.

2.Q: Can I get guarantee of products?
   A:  Yes, every product is 2 year quality warrantee under customer correct using the products.

3.Q: Do you have any Certificate?
   A: Yes. Each of our unit has  3C  certificate. If you need any other Certificate, we can help you to apply it.

4.Q: How can I pay you?
   A: Pay by T/T and  L/C is acceptable.


Any need for power transformer, please contact us:


Sales Manager:Fiona

 
Product Tag:
Related categories:
Scroll to Top