Complaint
| Description | Titanium plate, Titanium sheet, Titanium coil |
| Material | Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25 TA0,TA1,TA2,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4 |
| Standard | ASTM B265,ASME SB265,DIN17851,TiA16Zr5Mo1.5,JIS4100-2007,GB3461-2007 |
| Size | Cold rolled: Thick 0.02mm ~ 5mm * Wide 1500mm max * Long 2500mm max Hot rolled: Thick 5mm ~ 100mm * Wide 3000mm max * Long 6000mm max |
| Export to | Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA,Brazil,Thailand,Korea, Iran,India,Egypt,Oman,Dubai,Kuwait,Peru,South Africa,Russia,Malaysia,Chile,etc |
| Package | Standard export package,suit for all kinds of transport ,or as required. |
| Container Size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High) |
| Application | 1.Based on High intensity,titanium products tensile strength can be up to 180Kg/mm². 2.Titanium and titanium alloy in aviation industry, is called "space metal"; In addition, in the shipbuilding industry, chemical industry, manufacturing machinery parts, telecommunications equipment, hard alloy, etc have increasingly extensive application 3.In addition, because of the titanium alloy with the human body has very good compatibility, so the titanium alloy can also be artificial bone. |
| Contact | If you have any question ,please feel free to contact me . We are sure your inquiry or requirements will get prompt attention. |
| STANDARD | CHEMICAL COMPOSITION (weight %, max or range) | MECHANICAL PROPERTIES (min) | |||||||||||||
| ASTM B265 | UNS No | N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Tensile | Yield | El. | Red. |
| Mpa | Mpa | % | % | ||||||||||||
| GR 1 | R50250 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | 240 | 138 | 24 | 30 | |||||
| GR 2 | R50400 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | 345 | 275 | 20 | 30 | |||||
| GR 3 | R50550 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | 450 | 380 | 18 | 30 | |||||
| GR 4 | R50700 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | 550 | 483 | 15 | 25 | |||||
| GR 5 | R56400 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5-6.75 | 3.5-4.5 | 895 | 828 | 10 | 25 | |||
| GR 7 | R52400 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | 0.12-0.25 | 345 | 275 | 20 | 30 | ||||
| GR 9 | R56320 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5-3.5 | 2.0-3.0 | 620 | 483 | 15 | 25 | |||
| GR 12 | R53400 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | 0.2-0.4 | 0.6-0.9 | 483 | 345 | 18 | 25 | |||
| GR 23 | R56401 | 0.03 | 0.08 | 0.0125 | 0.25 | 0.13 | 5.5-6.5 | 3.5-4.5 | 828 | 759 | 10 | 15 | |||
| Grande | Specification(mm) | Manufacturing Process | Standard |
| Gr1 | THK(3.0~60) × W(400~1000)× ≤ L THK(5.0~70) × W(1000~2000)× ≤ L | Hot Rolled | ASTM B265 ASME SB265 AMS 4911 ASTM F67 ISO 5832-2 ISO 5832-2 Other related standards |
| Gr2 | |||
| Gr3 | |||
| Gr4 | |||
| Gr6 | THK(3.0~60) × W(400~1000)× ≤ L THK(0.1~0.3) × W(100~500)× ≤ L THK(0.02~0.1) × W(50~3000)× ≤ L | Cold Rolled | |
| Gr7 | |||
| Gr9 | |||
| Gr11 | |||
| Gr12 | |||
| Gr13 |
The hot forging Forging process is performed above the recrystallization temperature of the metal.
Hot rolling is a rolling process at a temperature higher than recrystallization.
Cold rolling process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: A process of heat treatment of metals by heating them slowly to a certain temperature, holding them for a sufficient time, and then cooling them at a suitable rate (usually slow cooling, sometimes controlled cooling).
Pickling: Immersion of a product in an aqueous solution, such as sulfuric acid, to remove a thin film, such as oxide, from the metal surface. It is the pretreatment or intermediate treatment of electroplating, enamel, rolling, and other processes
Petroleum, Metallurgy, Chemical, Pharmacy, Marine Engineering, Racing Car, Motorcycle, Bicycle, Yacht, Outdoor Camping and Sports Equipment. Medical industry, aerospace, spaceflight, airplane, military,etc
1.Are you a manufacturer or a trader?
We're a manufacturer with more than years of professional production experience.
2.Can you accept OEM?
Yes, OEM is acceptable. Just pls provide us with the drawing or sample, we will production totally according to your requirements.
3.Can you provide us with the design drawing?
Yeah, of course, we will provide you with the drawing after you paid or prepaid.
4.Can your factory produce products according to our drawings?
Yes, we can. Most products can be customized, including the Logo on products.
5.What kind of your packaging?
Neutral plywood or wooden box packaging or according to customer's requirements.
6.How long is your delivery time?Which ports are accepted for delivery?
Normally 30days after payment, and we promise we will deliver as soon as we can.It can be delivered from Qingdao, Tianjin, Shanghai, Guangzhou and other ports.
7.How can we get your price ?
A. We need below information to quote for you:
1). Product Name
2). Standard
3). Material Grade (Chemical Composition)
4). Dimension
5). Quantity
6). The Drawing for Special Parts
