4/0 AWG 10mm Hard Drawn Annealed Bare Brass Bright Copper Aluminium Conductor Bare Electricity Wire Price

Min.Order: 1,000
Product origin: Jinan, Shandong, China
Infringement complaint: complaintComplaint
US$ 1.37 ~ 4.55

Description
Product Description

Application of Overhead Insulated Cable:
Using this cable, it is unneccessary to prune the branches, so thant reduce the across and parallel distance of the cable. It is convenient to install and high mobility. It can reduce accidents of electric shouck and power failure carsing by circuit troubles. To guarantee supllying of electic power for industry production and residents` safety. It is especially suitable for an old city, which has densely buildings, densely population and narrow streets.
Standards
ASTM B230, B231, B232 and B-399 ,B498,ICEA S-76-474

 Basic Information
Model No: JKLYJ
Conductor: Alumnium Alloy
Material Shape: Round Wire
Certificate: ISO9001,ISO14001, CCC, CE       
Origin: Hebei, China.
Voltage: 0.6/1kv
Current: AC & DC
Insulation Material: XLPE
Sheath Material:PVC
Material Shape: Round wire


 Characteristics of Overhead Insulated Cable
1)Rated voltage U0/U: 0.6/1 KV
2)Max. Permissible long-time working temperature: PVC or PE insulated conductor is not more than 70, and that of XLPE insulation is not more than 90.
3)Installing temperature should not be below -20.
4)Admissible bending radius to cable: When overall-diameter (D) is less than 25 mm, it should be not less than 4D. When overall diamter(D) is 25mm or more, it should not be less than 6D.

Our overhead insulated cable have formed a system, such as single core, two-core, three core and four core. There are conductors of aluminium, aluminium alloy or aluminium steel-reinforced. We can manufacture the overhead insulated cable not only in accordance with China`s standard GB12527-90 but also the other standards and special requiement by the custormers.
Application of Overhead Insulated Cable:
Using this cable, it is unneccessary to prune the branches, so thant reduce the across and parallel distance of the cable. It is convenient to install and high mobility. It can reduce accidents of electric shouck and power failure carsing by circuit troubles. To guarantee supllying of electic power for industry production and residents` safety. It is especially suitable for an old city, which has densely buildings, densely population and narrow streets.
 

 

Product Parameters

Maximum operating temperature 90 degree

Maximum short-circuit temperature 250 degree. Service drop( ABC cables) are especially used at areas where the cost of underground networks is expensive and also for electrification of rural areas like villages.
PhasePhasePhaseApprox.Overall DiameterMax. D.C. Resistance of Conductor at 20 Centigrade
AAC+UV-XLPECompact ConductorUV-XLPE Insulation
No.X Normal Cross Section of CoresNo.of Al WiresOverall DiameterNormal ThicknessMin.Diameter
No. X mm 2-mmmmmmmmmmohm/km
1 X 1074.051.00.86.056.053.08
1 X 1674.81.20.987.27.201.91
1 X 25761.20.988.48.401.20
1 X 3577.01.41.169.89.800.868
1 X 5078.31.41.1611.111.100.641
1 X 70199.81.41.1612.612.600.443
1 X 951911.61.61.3414.814.800.320
1 X 12019131.61.3416.216.200.253
1 X 1501914.61.81.5218.218.200.206
1 X 1853616.22.01.7020.220.200.164
1 X 2403618.42.21.8822.822.800.125
2 X 1074.051.00.86.0512.103.08
2 X 1674.81.20.987.214.401.91
2 X 25761.20.988.416.801.20
2 X 3577.01.41.169.819.600.868
2 X 5078.31.41.1611.122.200.641
2 X 70199.81.41.1612.625.200.443
2 X 951911.61.61.3414.829.600.320
2 X 12019131.61.3416.232.400.253
2 X 1501914.61.81.5218.236.400.206
2 X 1853616.22.01.7020.240.400.164
2 X 2403618.42.21.8822.845.600.125
3 X 1074.051.00.86.0513.073.08
3 X 1674.81.20.987.215.551.91
3 X 25761.20.988.418.141.20
3 X 3577.01.41.169.821.170.868
3 X 5078.31.41.1611.123.980.641
3 X 70199.81.41.1612.627.220.443
3 X 951911.61.61.3414.831.970.320
3 X 12019131.61.3416.234.990.253
3 X 1501914.61.81.5218.239.310.206
3 X 1853616.22.01.7020.243.630.164
3 X 2403618.42.21.8822.849.250.125
4 X 1074.051.00.86.0514.643.08
4 X 1674.81.20.987.217.421.91
4 X 25761.20.988.420.331.20
4 X 3577.01.41.169.823.720.868
4 X 5078.31.41.1611.126.860.641
4 X 70199.81.41.1612.630.490.443
4 X 951911.61.61.3414.835.820.320
4 X 12019131.61.3416.239.200.253
4 X 1501914.61.81.5218.244.040.206
4 X 1853616.22.01.7020.248.880.164
4 X 2403618.42.21.8822.855.180.125
Certifications

                                                                             certifications
Our company has been adhering to the business philosophy of "creating famous brand, producing high-quality products, casting integrity, and emphasizing innovation" and the service concept of "integrity first, serving the society", and constantly strengthens structural adjustment and product upgrading.

         
Company Profile
Yantong Cable Co., Ltd. was established in 2006 and is located in Ningjin County, the hometown of cables in Hebei Province. The company has 56 high-voltage cross-linked power cable production lines, 56 low-voltage power cable production lines, 32 sets of testing equipment, registered capital of 218 million yuan, 287 employees, including 61 professional and technical personnel, covering an area of 16,500 square meters. The building area is 7,200 square meters.
    The company specializes in the production of cross-linked cables (35KV and below, including flame-retardant cables), plastic cables (including flame-retardant and fire-resistant cables), aluminum alloy cables, mineral fire-resistant cables, low-smoke, low-halogen, and low-smoke zero Halogen power cables, control cables, cross-linked polyethylene (PVC) insulated overhead cables, mine cables, prefabricated branch cables, rubber sheathed cables, silicon rubber wires and cables, computer shielded control cables Fluoroplastic insulated and sheathed high temperature resistant cables, fluorine Plastic insulated PVC sheathed control cables, low-temperature compensation cables, urea-resistant flat cables, high-temperature fire-resistant cables, steel-cored aluminum stranded wires, PVC cables, YP series cable materials, Y) series cable materials, plastic profiled materials, etc. .
   The company has been adhering to the business philosophy of  "creating a famous brand, serving the country 
by industry, creating high-quality products, benefiting mankind, forging integrity, serving the society, focusing on innovation, and going global", and constantly strengthens structural adjustment and product upgrading.
After Sales Service

1. The company implements a 24-hour after-sales service system, that is, after receiving the notification that the user needs to provide after-sales service, our marketing service personnel will contact you as soon as possible to assist you in dealing with after-sales issues.

2. The damage, quality problem and shortage of the product before the inspection shall be borne by our company.

3. The quality problems that exist or occur during the quality assurance period (within one year after the product is accepted) are confirmed by both parties as our company's responsibility. Our company is responsible for handling them properly and promises to provide services within 24 hours. Emergency and It is determined by the user through negotiation, and the reasonable expenses shall be borne by our company.

4. Our company will also actively assist in solving quality problems that are confirmed by both parties to be caused by the responsibility of the user, and strive to meet the reasonable requirements of the user.

5. Due to changes in user design, product specifications, models, and quantities have changed, our company will actively respond to the urgent needs of users and strive to meet user requirements; if the products ordered by users exceed actual needs or the original ordered products cannot If you continue to use it, our company will actively cooperate with users to deal with the aftermath and reduce the burden on users.
 

Packaging & Shipping

1 Requirements for product packaging in rolls
  In general, wires and cables are packaged in rolls of 100 meters per circle, and in special cases, it is allowed to form coils according to the actual length.
2 Coiled wires should be tightly wrapped with transparent film, and the certificate of conformity should be tightly wrapped in the film.
   The model and specification of the finished product
2. 1 Plastic insulated control cable:
  KVV , KVV 22 , KVVP , KVVR , KVVRP specifications with a net weight of more than 80K g per 100 m.
3. Plastic insulated wire:
  227IEC(01)BV70 mm 2 and above specifications;
  BLV120 mm 2 and above specifications.
3.1 PVC insulated power cables
  VV, VLV, VV 22, VLV 22, YJV, YJV 22, YJLV, YJLV 22, etc. all specifications.
4. Wires and cables are coiled according to user requirements.
5. Product delivery tray
5.1 The type, size and technical requirements of the product delivery tray shall meet the specifications of GB4005.1-83 and GB4005.2-83.
5.2 The structure of the delivery tray can be made of wood or steel and wood.
5.3 When selecting the delivery tray, its tube diameter (D) should meet the requirements of the bending radius:
   Single-core cable (d): D > 25 d
   Multi-core cable (d): D > 20 d.
5.4 The selection of the delivery tray is based on the premise that the tube diameter meets the requirements of the bending radius of the installed cables, and its size should be compatible with the delivery length and specifications of the cables.
6. Packaging of coiled cables (wires)
6.1 Disk loading requirements
6.1.1 Generally, cables (wires) should be delivered in coils one by one, and the length should not be less than 100 m.
6.1.2 It is allowed to deliver short cables (wires) in platters with a length of less than 20 m, and the quantity should not exceed 10% of the total delivery length.
6.1.3 According to the agreement between the two parties, it is allowed to deliver cables (wires) of any length.
6.1.4 Meter counters shall be used for length measurement, and the error shall not exceed ± 0.5%.
6.1.5 The products are neatly arranged in a tray, and the distance between the outermost layer and the edge of the tray should not be less than 50 mm.
6.1.6 If multiple cables (wires) are allowed to be delivered as a platter, the length of each cable (wire) from inside to outside shall be indicated on the certificate of conformity.
6.2 Disposal of cable (wire) end
6.2.1 The end of the coiled cable (wire) should pass through the oblique hole on the side plate of the delivery tray, and the length should not be less than 300mm.
6.2. 2 The cable (wire) head should be reliably sealed to ensure that the cable (wire) end does not enter water.
6.2.3 If multiple platters are allowed to be delivered, the tail end of the previous one and the front end of the rear root shall be connected by ropes.
6.3 Protection
6.3.1 After the cable (wire) is coiled, its outermost surface should be covered with a layer of moisture-proof paper, felt or burlap as an inner protective layer.
6.3.2 Appropriate outer protective layer should be used for protection outside the inner protective layer. The outer protective layer can be made of bamboo curtains, bamboo guard boards or other equivalent materials, and its width should be 5 mm to 10 mm smaller than the inner width of the corresponding delivery tray. mm, its length should be determined according to the loading capacity.
6.3.3 According to the agreement of both parties, it is allowed to use any method of protection.
6.3.4 Two layers of plastic strapping (with a width of about 15 mm and tightened tightly) should be applied outside the outer sheath.

 
FAQ

1, Who are we?
Yantong Cable was established in 2006. After more than ten years of development, it has an area of 16,500 square meters, nearly 287 employees, including more than 200 technical personnel of various types, and a registered capital of 218 million yuan.
2,Is the quality of your products guaranteed?
Yes,the quality of our products is highly guaranteed. The products are ISO 9001 ,ISO 14001,OHSAS 18001 certificated. Our workshops are equipped with advanced production and inspection equipment and the products strictly according to international standards or customers' requirements. We do 100% inspection for every batch of semi-finished and finished products.

3,Which markets do you involve mainly in?
Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.
4, How can I get samples?
Please notify the detailed information of sample you need. If we don't have the exact model, please consider whether the similar model is OK for you. we provide the free samples for inspection while freight is charged.

5,What kinds of products does yantong Cable manufacture?
1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;
2)Aerial Bundled Cable ( Below 35kv),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire ;
4) PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low,/Medium Voltage (Below 35kv) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;
6,What is the min. Order quantity? 
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted. But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow, we will try our best to solve the problem and meet with the requirement If you have special request.  

7,What's the package of products ?
The package is usually wooden drums ,steel drums,steel-wooden drums or according to customers' requirement.

8, What's your delivery time?
A: Products with stock available will usually be ready for dispatch within one working day since PO confirmed and deposit received; Products to be manufactured takes several days to several months depending the item types and quantity.

Product Tag:
Related categories:
Scroll to Top