Solarparts 100W 18V Solar Panel with Aluminum Frame for House Home Industrial off Grid System with Controller

Min.Order: 100
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 72

Description

Solar power system is a new kind of energy-saving and environmentally friendly system. It is a system which uses PV modules to convert sunlight into electricity. It's made up of PV module, controller, battery and inverter. It is mainly used in some remote and power-unstable areas.

Solar PV systems are very reliable and clean source of electricity that can suit a wide range of applications such as residence, industry, agriculture, livestock, etc.

Solar power system is mainly used to drive all kinds of household electrical appliances and office equipment, to solve the power shortage situation without electricity or people living or working electricity problem.

Monocrystalline solar panel design using the highest quality cell. Our grade A monocrystalline cell had the highest efficiency in the solar industry which produce the most power compare to any other brands solar panel in the market.

The solar cell is protected by our strong tempered glass which had gone through 1m steel ball test. Covered with 25 years warranty, you will never find a better solar panel out there.

Specification
Maximum power(Pmax) 100W
Output tolerance ± 3%
Maximum system voltage 700V DC
Open circuit voltage(Voc) 21.6V
Maximum power voltage(Vmp) 18V
Cell efficiency 21%
Operating temperature(NOCT) 45±2ºC
Temperature range -40ºC~+80ºC
Number of cells 36pcs
Weight 3100g
Size 1160*530*25 mm
Standard Test Conditions : lrradiance 1000w/m2,Temperature 25ºC,AM=1.5

Packing List
1. 2x solar panel 100W
2. 1x 20A/30A/40A solar controller
3. 1x PV cable
4. 1x 3m alligator clip cable
5. 8x Z-brackets



Features:
1. Efficiency: monocrystalline panels come with high-efficiency solar cells that help increase space efficiency.

2.Easy Installation: Pre-drilled holes on the back of the panel allow for fast mounting and securing. Compatible with different mounting systems such as Z-brackets, Pole Mounts.
3.Long Lifespan:Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades.
4.Sturdy:Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance.IP65 rated junction box provides complete protection against environmental particles and low pressure water jets. TPT back sheet ensures smooth performance over a long period of time.



Product Description:
Easy to use: This product is a semi-flexible board that can be bent up to 30 degrees. It is suitable for mounted on an irregular smooth surfaces such as RV roofs, boats, tents, Yacht, vaulted roofs, etc.
High efficiency, Light weight: only 2.5mm thick, weight 1.1kg, easy to hang, disassemble and carry.
Easy to install: Metal holes in the four corners of the product for fixing screws and mounting. Each solar panel has been tested several times.
The junction box on the back of the solar panel has a Schottky diode built in to prevent reverse current.
The solar panel operates at 16V. Please purchase a solar controller to charge the battery.
This bendable solar panel is a good choice for curved surfaces of RV, boat,sailboat, yacht,truck, car, coach, cabin, camper , tent , trailer, golf cart or any other irregular surface.
The junction box is sealed and waterproof. The Panel is highly stain-resistant and easily gets cleaned by the rain. Highly resistant to the harsh operating conditions of a marine environment.
Thin and lightweight, easy to transport and remove
6 stainless eyelets at the edges for easy installation; can be easily affixed by adhesives, silicon glues, double sticky tape, zip ties or velcro
 
1. Good bendability. The solar panel can be curved to a maximum 30 degree arc, allowing to be mounted on an RV, boat, cabin, tent, car, trucks, trailers, yacht, motorhome, Roofs, or any other irregular surface.
2. High conversion efficiency. High efficient monocrystalline solar cell, adopt unique back contact technology and remove electrodes on the solar cell surface that block the sunshine to increase the solar panel conversion efficiency up to 50% more efficiency than ordinary.
3. Light weight & easy to install. It is only 0.1 inches tall and weighs only 3.97lb, which is very suitable for the assembly of invisible solar energy. And the solar panel is easy to transport, install, hang, and remove.

 
Product Tag:
Related categories:
Scroll to Top