l Unwinding unit l Unwinding driven unit l Pre-heating unit l Printing unit l Drying unit l Rewinding driven unit l Rewinding unitl Control system and operating platform
MACHINE MAIN TECHNICAL FEATURES A. Printing material: PP\PE\PET\PVC...
B. Web thickness: 10-70μm C. Max. printing width: 800~1500mm D. Printing colors: 4~12 colors E. Printing repeat: 400-800mm(φ127-φ255mm) F. Plate/Tape thickness: (a) 1.7+0.38mm (b) 1.143+0.5mm G. Max. machine speed: 450m/min H. Printing speed: 15-400m/min I. Lubrication system: Centralized lubrication J. Web direction: From left to right(from operator's side) K. Ink type: Water-based, ethanol-based or solvent-based ink L. Driven method: Servo motor driven
M. Register precision: ±0.1mm N. Power supply: 380V,50Hz(Or at customer's requirement) O. Max. unwind/rewind diameter: φ600mm P. Heating method: Electrical heating (Available of hot oil, gas heating) Q. Total Motor power: 110kw(based on 1200-8)
R. Running power: 60KW (based on 1200-8) S. Electrical heating power: 120KW (based on 1200-8) T. Max. noise: Lower than 85dBa(1m from the machine) U. Suggestion operation temperature: 10-35 0C V. Relative humidity: 30-80%(200C as reference temperature) W. Elevation height: Max.1000m X. Compression air: No lubrication,drying and wipe off humidity with filter Air pressure:6Bar Dew point:+20C Y. Tension control: 6~18kg/full load Z. Cooling water: Filter:less than 20u pressure:Min.2Bar--Max.3Bar cooling roller entering water temperature(room temperature+200C):from 15ºC to 180ºC central drum recycling water temperature:300ºC±20ºC hardness(CaCO3):2.5-4mg/L PH:7-8.2 AA. Machine color: RAL3020(red)+RAL7035(cream) BB. Machine size(L×W×H): 11m×4.5m×5.5 m
Complaint
