Complaint
LTC214 Hydraulic vibratory rollers are manufactured according to international advanced technology and by use of
imported components from abroad. The machine is a double drum tandem vibratory roller. It is Primarily used for
the compaction of road bituminous course, sand gravel mixtures and RCC material, Being a universal compaction
equipment for highway, municipal road, park area and industry ground etc.
Main Features:
· Full hydraulic two wheel drive and vibration.Double frequency double vibration system.
· Reliable CUMMINS diesel engine for convenient operation and maintenance.
· Hydrostatic center articulated steering,Optional patented crab mechanism.
· Cabin with air conditioner,comfortable and spacious,the flexible steering seat facilitate the operation.
· The driver's cabin can be turned on one side as a whole, to facilitate maintenance.
· For-type frame, good hold-down property.
· Hydraulic pump and vibrating motors are of the products made by American manufacturer DANFOSS.
| Main Technical Parameters: | |
| Model | LTC214 |
| Operating mass | 14000kg |
| Font axle load | 7000kg |
| Rear axle load | 7000kg |
| Static linear load | 333N/cm |
| Form of frame | fork-type |
| Type of water spray | pressure |
| Water tank capacity | 600x2L |
| Fuel tank capacity | 154L |
| Hydraulic oil tank capacity | 65L |
| Vibration amplitude | 0.8(High)/0.4(Low)mm |
| Vibration frequency | 40/46Hz |
| Centrifugal force | 160x2(high)/90x2(low)Kn |
| Travel Speed | 0-10Km/h |
| Steering angle | ±30° |
| Electrical voltage | 24V |
| Grade ability | 40% |
| Turning radius | 7000mm |
| Overall dimension (LxWxH) | 5060x2250x3300mm |
| Vibration drum diameter | 1350mm |
| Drum width | 2100mm |
| Wheel base | 3717mm |
| Diesel engine power | 110Kw/2300rpm |
| Diesel engine model | CUMMINS 6BT5.9 |
| Ship | 1 unit4OHQ |
| Optional:removable padfoot,Top-mounted air conditioner | |
| Our Products will be continuously improved with the progressing of the technique, So please indicate the difference between the listed parameters in the sample sheet and structure features and take material object as the standard. |
