Complaint
Floor heating has increasingly become the main way of building heating. Traditional floor heating, also known as wet floor heating, has a long construction period and occupies the height space of the building.
Beipeng Group independent R&D of high-intensity floor heating module for dry floor heating, which is simple construction, reduce height space occupation, easy for prefabricated building points.
- High strength floor heating module is made of high strength extruded plate processed by intelligent slotted composite thin aluminum plate.
- High strength floor heating module is a new type of floor heating insulation material with extra high strength, excellent insulation performance, high flame retardant, environmental protection, high efficiency heat radiation, modular assembly and other advantages.
| Beipeng high-intensity floor heating extruded XPS board | ||||||||||
| Thermal Conductivity | W/m2·K | ≤0.028 | ||||||||
| Dimensional stability | % | ≤1.5 | ||||||||
| Compressive strength | kPa | 200~1000 | ||||||||
| Water absorption | % | ≤1.5 | ||||||||
| Combustion performance | B1 | |||||||||
| Density | kg/m2 | 22-35 | Customization is accaptable | |||||||
| Size | mm | 1200*600 | ||||||||
| Thickness | mm | 20 | 25 | 30 | 40 | 50 | 60 | |||
| Surface | Aluminum Foil | Pipe Groove | Peeled | With Epidermis | ||||||
Beipeng® high strength floor heating module core material selection of high quality high strength extruded board, intelligent engraving equipment and automatic composite production line through strict quality control processing, has the following excellent characteristics:
1. Super high compression strength 1200KPa,
high thermal resistance,
low thermal conductivity,
environmental protection,
efficient thermal radiation,
the gradual diminution under prolonged stress.
2. Modular assembly, simple construction, prefabricated buildings plus points
3. Reduce the occupation of the height of the space inside the building
4. Suitable for floor, tile, marble and so on.
Total capacity: 2 million square meters/year
1. Beipeng extruded board process-CO2 foaming process
2. The cells are small and uniform in size
3. The link wall between the cells is uniform in thickness
4. High closed cell rate
5. No secondary foaming phenomenon
6. No residual solids and no foaming
All kind of insulation buildings.
Beipeng underfloor heating panel is
1. High compressive strength from 200kpa~1200kpa, normally 300kpa (1SQM hold 30tons weight)
2. Waterproof, fireproof, soundproof building materials
3. Various insulation board thickeness and aluminum layer thickness for differnt budget
4. Do small influence to room space
5. Dry installation environmentally, support DIY cutting and all products are recycle.
6. Quick handle, two labour can finish 1000SQM room within two hours
7. Raw material free of CFC, HCFC, HBCD, approved by SGS and EN13164, and we are holding ISO14001, ISO9001 and ISO45001.
