Complaint
The test bench is composed of a hydraulic station (main and auxiliary oil tanks), a 22KW pump test bench, a control console, and a power cabinet
Hydraulic pump test: When testing the pump, the main motor directly drives the tested pump, and the load is applied through the loading valve at the outlet of the tested pump. During the test, data is collected through temperature, pressure, flow, torque, and speed sensors, so that Realize the test performance analysis of the hydraulic pump. The test bench is equipped with an oil supply interface and an oil return interface, and the pressure, temperature, flow rate, and rotational speed are digitally displayed. The pump test adopts hydraulic loading.
System temperature control: Set water cooling and heat dissipation, and the customer provides water source.
The oil tank is elevated to improve the oil absorption capacity of the tested pump. The fuel tank is mainly composed of fuel tank body, air filter, oil level, oil suction and oil return filter, liquid level relay, temperature sensor and other parts. It has the functions of oil tank liquid level detection, oil return filtration and differential pressure alarm, oil tank temperature detection, circulation filtration, etc.
Portable Hydraulic Pump and Motor Tester,Digital Hydraulic Testing Equipments For Excavator
YY-5 Digital Hydraulic Pump and Repairing Motor Tester For Crane
Portable hydraulic tester features
1) portable hydraulic tester high precision - full scale ± 1%.
2) Portable hydraulic tester Turbine flow sensor - fast response, anti-pollution, low pressure loss.
3) portable hydraulic tester platinum resistance temperature sensor - temperature fast, accurate, good stability.
4) portable hydraulic tester flow and temperature display - using 4 LED digital tube display, free from low temperature limit, instantaneous flow 0.000-9999, breakpoint data to maintain 10 years.
5) portable hydraulic tester pressure indicator - seismic pressure gauge, stable and overload capacity.
6) portable hydraulic tester safety design - instrument reverse, can not afford pressure, power supply instructions.
7) hydraulic tester easy to operate - can be measured at a point at the same time flow, pressure, temperature. Change the flow and temperature through the contact switch. Pressure valve adjustment intensity is light, loading smooth, fast and accurate. To ensure measurement accuracy, keep the temperature change within ± 3 degrees. Low pressure table through the pressure line can be measured system control pressure.
8) Portable hydraulic tester wide range of applications - compact, light weight, can be pump test, the system on-line testing for a variety of mobile or fixed hydraulic system, components, rapid fault diagnosis
Portable Hydraulic Repairing Motor and Pump Tester,Hydraulic Pump Testing Equipments For Paver
Comprehensive Hydraulic System Testing Equipment,Hydraulic Motor and Pump Test Stand
Comprehensive Hydraulic Pump and Cylinder Test Stand For Repairing
Hydraulic test bench (hydraulic integrated test bed, hydraulic test bench, hydraulic pump test bench, hydraulic valve test bench, hydraulic motor test bench, hydraulic cylinder test bed, hydraulic multi-valve test bench, hydraulic hammer test bench) Analog control, can also be designed according to customer requirements. Used in hydraulic components manufacturing enterprises and hydraulic components maintenance testing units. You can try a variety of components (valves, pumps, double triple engineering machinery pumps, open closed pumps, proportional control pumps
Product Specifications
1. Hydraulic valve integrated test bed
The test bench can be measured hydraulic directional valve, pressure valve and flow control valve three types of hydraulic control valve dynamic and static performance, equipped with CAT computer-aided test system. Test scope, test items
The test bench parameters are as follows
Test range directional valve, pressure valve, flow control valve
Maximum test pressure 35MPa
Maximum test power 75KW
Test accuracy ISI-B level
Control manual or computer automatic control
Test Range:
1. Hydraulic Pumps and Motors
2. Gear Pumps
3. Vane Pumps
4. Tandem Pumps
5. Hydraulic valve or cylinder etc auxiliarily test
Features:
| Flow rate | 500L/min |
| Pressure | 0-42Mpa |
| Power | 55KW 75 KW 90KW 110KW 160KW 200KW |
| Application | test and maintaince of hydraulic pumps, motors ,valves and cylinders. |
