Complaint
1.Impulse spray disinfection, temperature evenly in the kettle
Setting the impulse spray device, the hot water spray assume wave type, and setting 45 angle spray nozzle on the four corner of every plate and setting several multi-spray heads between each separate plate, carry through sector type spray disinfection, ensure temperature evenly in the kettle.
2. Adopt multi-segment warming, disinfection completely
According to different products adopt multi-segment warming disinfection, multi-segment temperature drop, ensure all kinds of food original nutrition component undestroyed, keep the original color of the product unchanged.
3.Indirect heating prevent the pollution between the steam and the goods
The cycle water in the kettle through the cycle pump, is sent to the transmission for heating or cooling. Avoid the touch of the goods and steam and the cooling water, prevent the secondary pollution, thanks to using the cycle pure water, the kettle internal surface and the goods' surface clearly brightly without furr and pollution.
4.Pressure to provide reasonable control fit on nitrogen packaging disinfection
Computer procedure autocontrol temperature, pressure on the balance of rise and lower, is essencial to the nitrogen package, glass bottle and plastic bottle, ensure not distortion, not fragmentation, make every product better disinfection.
5. Computer fully automatic control system.
Use the most advanced computer control system of the world
Use large touching screen, disinfection process use carton expression
Automatic regulate the temperature of the kettle adopt temperature film regulate valve
Use electronic sensor to control temperature and pressure
Use high-effciency heat interchanger, reach the bacteria killing temperature within a few minutes.
That can instantly print and store the time, temperature and the pressure curve charts
All the valves switch adopt computer programmed control
All the disinfection procedures adopt computer automated control, without manual operation
6. F value measurement function
RiTong compony according to different users' requirements, install the caculated functions that can dispose measurement F value in the disinfection kettle respectively, all the disinfection data, include the disinfection conditions, F value, time temperature -curve, time-pressure curve etc. may be saved or printed after dealing by the data-processing software, for the production management later.
7. Storage disinfection formula
According to different products setting many special sterilization formula.
Technical parameters
Model | RT-900 | RT-1000 | RT-1200 | RT-1300 | ||||||||
1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | |
Diameter(mm) | 900 | 1000 | 1200 | 1300 | ||||||||
Cytinders length(mm) | 1800 | 2500 | 3000 | 2200 | 2500 | 3000 | 3000 | 3600 | 4000 | 3000 | 3600 | 4000 |
Total length(mm) | 3000 | 3400 | 3800 | 3300 | 3800 | 4000 | 4200 | 4800 | 5300 | 4300 | 5000 | 5500 |
Total length(mm) | 1750 | 1750 | 1750 | 1800 | 1800 | 1800 | 1900 | 1900 | 1900 | 2000 | 2000 | 2000 |
Total high(mm) | 3000 | 3000 | 3000 | 3200 | 3200 | 3200 | 3400 | 3400 | 3400 | 3600 | 3600 | 3600 |
Material | SUS304/Q235B | |||||||||||
Design temperature | 147°C | |||||||||||
Experiment pressure | 0.44Mpa | |||||||||||
Design pressure | 0.35 Mpa | |||||||||||
Assistant equipment
Model | RT-900 | RT-1000 | RT-1200 | RT-1300 |
Gas storage tank(m3) | 0.5-0.8 | 0.8-1.0 | 1.0-1.5 | 1.5-2.0 |
Air compressor | 0.36/8 | 1.0/10 | 1.0/10 | 1.5/10 |
Storage water tank(m3) | 2.5-3.0 | 3.0-4.0 | 4.0-5.0 | 5.0-6.0 |
Boiler T/H | 0.2-0.3 | 0.3-0.4 | 0.4-0.5 | 0.5-0.8 |
Total power (kw) | 19 | 21 | 21 | 25 |
it can simulate the sterilization environment of actual production so as to test F0 value and develop sterilization formula, reduce product loss in experiment and raise the yield of mass production. sterilization mode can be divided into as follow:
Water spray
Water immersion
steam
Sterilization condition:
Static
Rotary
Warmly welcome to visit our factory
We will deliver your goods by LCL/20'FCL/40'FCL depending on your order.
Before delivery, our professional technician will do trial run for each product to check until everything is functional, you also can come to our factory and test our machine together with us.
When loading, our workers will fix the retorts tightly with wire rope so that the retorts can't move in the container
If you are interested in buying a rautoclave machine retort-sterilizer cans, you need to provide us product packaging and heating method of the machine you need, so our engineer can design the machine for you and we will give you a detail quotation.
Qingdao Evertech Indusry Co.Ltd
