Water-Resistant Calcium Base Grease If You Want a Low Price Product, Choose It

Min.Order: 1

Product origin: Puyang, Henan, China

Infringement complaint:

Complaint

US$ 1 ~ 3

Description

Introduction:
Calcium base grease is made of mineral lubricating oil with medium viscosity thickened by natural fatty acid calcium soap, and calcium base grease is synthesized
It is made of mineral lubricating oil with medium viscosity thickened by synthetic fatty acid calcium soap.
Performance characteristics
(1) Because calcium soap and water form hydrates, only in the form of hydrates can calcium soap form highly dispersed fibers in mineral oil. The hydrates of calcium soap hydrolyze at about 100 ºC, which is the reason why the calcium base grease gradually loses its consistency above 100 ºC, which limits the temperature range of calcium base grease. Generally, the temperature is not more than 60 ºC. If the temperature is exceeded, the calcium-based grease will become soft or even lose, so the lubrication cannot be guaranteed.
(2) Calcium base grease has good water resistance and is not easy to emulsify and deteriorate when passing through water. It can be used for lubrication of various mechanical parts in wet environment or in contact with water.
(3) Calcium base grease has good shearing stability and thixotropy stability. When it is agitated and then still in use, the grease can still remain on the action surface, producing sealing effect without throwing out.
(4) Calcium base grease has good pumping performance because of its short fiber and low strength limit. When using the same mineral oil and

making the same consistency, calcium-based grease is easier to bind than other soap-based grease (such as sodium-based or aluminum-based).
Although the calcium-based grease is an old variety in the 1930s, it is still a more widely used variety in the world today. It can be used to lubricate rolling and sliding bearings with medium speed and load in small and medium-sized motors, water pumps, tractors, automobiles, metallurgy, textile machinery, etc.

Typical data

Appearance	Smooth
NLGI grade	3#
Thickener Type	calcium
Corrosion resistance(52ºC,48h)	Qualified
Worked Cone Penetration,0.01mm	220~250
Dropping point	130ºC min
Max operating temperature	80ºC
Min operating temperature	-20ºC
Evaporation(99ºC,22h)	0.78% max
Copper corrosion(100ºC,24h)	No blue change
Extreme pressure performance PB(four ball machine method )	-----N min
Similar viscosity (-15ºC,10s-1)/(pa.s)	860max
Steel mesh oil (100ºC,24h)	2.3% max
Water loss amount(38ºC,1h)	3.4% max

Company Introduction

Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province.

After 32 years of steady development, the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales. grease design capacity is 100,000 tons,10 grease production lines, 38 sub-assembly production lines,lubricant design capacity is 100,000 tons, 12 lubricant production lines, two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons. the company's products have outstanding performance, complete varieties and distinct grades.

Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.

Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties.

At the same time, the company also provides OEM, ODM custom foundry services.
FAQ

1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 30 years of industry experience. Our factory is located in Puyang City, Henan Province.

2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.

3. What is your terms of payment?
Based on our sales policy, L/C or T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We can provide you with real photos or video of the goods before balance payment.

4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.

5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.

6. Can I get some samples from your side?
We can provide free samples, the freight cost will be born by you.

7. Is it possible to do ODM or OEM for us?
We would like to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples, that will be helpful for us to do test.

Forward

Related products