Complaint
| Item | Specifications | ||
| Basic Functions | Control system | Current Vector General Purpose Inverter. | |
| Compatible motor | Induction motors. | ||
| Maximum frequency | Vector control: 0~500Hz; V/F control: 0~500Hz. | ||
| Carrier frequency | 0.8kHz~12kHz; Depending on load, can automatically adjust. | ||
| Input resolution | Digital: 0.01Hz; | Analog: maximum frequency×0.1%. | |
| Control modes | Open vector control (SVC); V/F (scalar) control. | ||
| Starting torque | G type: 0.5Hz/150% (SVC); 0Hz/180% (FVC). P type: 0.5Hz/100%. | ||
| Speed range | 1: 100 (SVC) | 1: 1000 (FVC) | |
| Speed accuracy | ±0.5% (SVC) | ±0.02% (FVC) | |
| Torque accuracy | ±5% (FVC) | ||
| Overload capacity | G type: 150% rated current 60s; 180% rated current 3s; P type: 120% rated current 60s; 150% rated current 3s. | ||
| Torque boost | Automatic | Manual 0.1%~30.0% | |
| V/F curve | Straight-line V/F curveMulti-point V/F curveN-power V/F curve (2-power, 1.4-power, 1.6-power, 1.8-power, 2-power square) | ||
| V/F separation | Two types: complete separation; half separation. AVR output. | ||
| Ramp mode | Straight-line rampS-curve rampFour groups of acceleration/deceleration time: 0.0-6500.0s | ||
| DC braking | DC braking frequency: 0.00 Hz to maximum frequency Braking time: 0.0-36.0s Braking action current value: 0.0%-100.0% | ||
| JOG control | JOG frequency range: 0.00-50.00 Hz JOG acceleration/deceleration time: 0.0-6500.0s | ||
| Simple PLC | Up to 16 speeds via the simple PLC function or DI terminals | ||
| Onboard PID | Process-controlled closed loop control system | ||
| Auto voltage regulation (VR) | Keep constant output voltage automatically when grid voltage fluctuates. | ||
| Overvoltage/ Overcurrent stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/overcurrent. | ||
| Fast current limit function | Protect inverter from overcurrent malfunctions. | ||
| Torque limit and control | It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be implemented in the FVC mode. | ||
| Power DIP ride through | The regenerative energy from load compensates the voltage reduction so that the inverter can continue to run for a short time. | ||
| Timing control | Time range: 0.0-6500.0 minutes | ||
| Two-motor switchover | Two motors can be switched over via two groups of motor parameters. | ||
| Fieldbuses | RS485 | ||
| Operations | Command source | KeyboardControl terminalsSerial communication portYou can perform switchover between these sources in various ways. | |
| Frequency source | 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. You can perform switchover between these sources in various ways. | ||
| Auxiliary frequency source | 10 auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis. | ||
| Input terminal | 5 digital input (DI) terminals; 2 analog input (AI) terminals which support 0-10V voltage input or 0-20mA current input. | ||
| Output terminal | 1 digital output (DO) terminal; 1 relay output terminal; 1 analog output (AO) terminals which support 0-20mA current output or 0-10V voltage. | ||
| Display And Panel | Key lock | It can lock the keys partially or completely and define the function range of some keys so as to prevent misconducts. | |
| Protection functions | Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, under voltage protection, overheat protection and overload protection | ||
| Environment | Location | Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt. | |
| Altitude | Less than 1000m. | ||
| Ambient temperature | -10°C to +40°C (de-rated if the ambient temperature is between 40°C and 50°C) | ||
| Humidity | Less than 90%RH, without condensing | ||
| Vibration | Less than 5.8m/s2 (0.6g). | ||
| Storage temperature | -20ºC~+60ºC. | ||
| Inverter model | Dimensions(mm) | Holes(mm) | Net(Kg) | ||||
| H300-02D2T4G | H | W | D | A | B | ||
| 142 | 85 | 110 | 73 | 130 | φ4.5 | 0.9 | |
