Wood Impregnation Processing Equipment Wood Autoclave

Min.Order: 1

Product origin: Qingdao, Shandong, China

Infringement complaint:

Complaint

US$ 10000 ~ 12000

Description

Product Description

Timber Wood Vacuum Pressure Impregnation Autoclave

Industry autocalve for wood dyeing plant (Vacuum impregnate equipment) apply to each wood's corrosion protection, fire retardant, mothproof, fire prevention, insect-resistant, modification, dyeing, coking, degrease and deep processing. Wide applicability, better effect of processing, big capacity. reasonable layout, safety and reliable are the advantages of this equipment. And it also have advantages of reduce labor intensity and working cost. It completely meet the requirement of deep processing of all kinds of wood.

Parameters

Model	Diameter(mm)	Length(mm)	Capacity(m³)	D.pre(Mpa)	D.Temp(ºC)	Voltage(V)
ET10/80	1000	8000	6.28	1.0	-0.098	380
ET15/80	1500	8000	14.1	1.0	-0.098	380
ET17/80	1700	8000	18.1	1.0	-0.098	380
ET17/120	1700	12000	27.2	1.0	-0.098	380

Usage
Wood /Timber/Bamboo anticorrosion
Wood/Timber/Bamboo impregnation
Wood/Timber/Bambo preservation
Wood/Timber/Bambo storing

Applicative Wood
All species of woods such as pinewood, cedarwood, rosewood, etc.
All shapes of woods such as log, timber, wood plate, etc.

Features
§ Wood treatment equipment apply to be preservation, termite proof and to prevent fungal. Especially outdoor wood floor, landscape floor, outdoor wood platform and wood plank road and other preservative wood pergola.
§ This treatment equipment have special craft for wood, such as: vacuum pressure method, fullcell method, high low frequency pressure as so on. Especially vacuum pressure method. The preservative level can get C4.
§ You can use CCA and ACQ two kinds of preservative match our wood preservation equipment.
§ PLC is a new intelligent control wood preservative system, which make the wood preservationequipment to be easy, and to be safety, to be reliable. Meanwhile, Even if the wood don't be push out, this can accurately calculate if the preservative is permeated in the wood.

Principle
It combines vacuum and pressurizing.
§ Vacuum: suck out air out of tank and wood cells, which makes it easy for chemical agent to be absorbed into wood cell.
§ Pressurizing: help chemical agent go into wood cell with pressure.

Working process
§ Inicial vacuum:suck air out of tank and wood with vacuum pump and keep the vacuum status 15minute to 1 hour according to treatment aims. Vacuum status is good for agent liquid goes into wood.The vacuum degree can be 0.098MPa.
§ Agent liquid adding: under condition of vacuum pump agent liquid into tank.
§ Pressurizing:When tank is full of agent liquid, pressurize tank with pressure pump.The pressure inside tank will rise slowly to rated pressure.Then keep the tank under rated pressure until wood have absorbed enough agent liquid.
§ Pressure discharging:When wood have absorbed enough agent liquid,discharge inside pressure and agent liquid that have not been absorbed.
§ final vacuum:when the rest agent liquid has been discharged,suck air out of tank and wood with vacuum pump again to make redundant agent liquid exude from wood cells or surface to avoid liquid drops.

Shipping
Our machines and equipments are packed in standard package that fit for long distance road transportation and shipping. We ensure our customers can receive the undamaged machine in good condition.

Customer Site
We have a professional working team that can design for you, to ensure that you buy the best quality and fittest machine in least money.
After sale, we provide one-year warranty to make sure that your machine runs functionally and consistently. We also provide lifelong services and spare parts for the machine.

We have a professional working team that can design for you, to ensure that you buy the best quality and fittest machine in least money.
After sale, we provide one-year warranty to make sure that your machine runs functionally and consistently. We also provide lifelong services and spare parts for the machine.

Company Information

We have three production lines to meet customers' requirements ,more than 20 senior engineers to design ,skillful welder to process the equipment ,24hours after-sales team to support. Our products have been sold to Russia, French, Peru, Uganda, Tanzania, Kenya and Burma.

Welcome to place an order.

Forward

Related products