Complaint
| Product introduction | |||||||||||||||
| The product process of 5083 aluminum square pipe is strictly controlled by heavy metal treatment. Through the determination of alloy composition, optimization of melting and casting process, homogenization heat treatment and rolling process test, the product performance is equivalent to that of foreign materials, especially meeting the processing requirements of complex parts such as marine aluminum pipes, rail transit, automobiles and molds, and has broad application prospects. | |||||||||||||||
| Performance advantages of 5083 aluminum square tube; | 1, with medium strength 2, corrosion-resistant, recyclable 3. Excellent weldability and cold workability. 4. It has good formability. | ||||||||||||||
| 5083 aluminum square tube uses: | 1. The 5083 aluminum square pipe is used in ships: it is usually in the state of 5083H116/H321/H112, and Mingtai Aluminum's 5083 marine aluminum plate has passed the certification of CCS/BV and other classification societies; 2. The 5083 aluminum square pipe is used for vehicles: aluminum alloy tank car body/tank, automobile fuel tank, gas accumulator, bus skin, C82 coal truck, automobile roof/bottom guard, etc. It has cooperated with Yutong Bus and Shaanxi Automobile Heavy Truck. 3. 5083 aluminum square pipes are used for LNG tanks: LNG storage tanks, molds, flange materials, GIS high-voltage switch shells, precision machining, etc. Has more than 160,000m3 project experience in LNG storage tank application. | ||||||||||||||
| technical parameter | |||||||||||||||
| Typical alloy | 5083 aluminum square tube | ||||||||||||||
| GB standard | GB3190-2008:5083 | ||||||||||||||
| American Standard | ASTM-B209:5083 | ||||||||||||||
| European standard | EN-AW:5083/AIMg4.5Mn0.4 | ||||||||||||||
| Material state | F,O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 | ||||||||||||||
| diameter | 5 mm -2500 mm or according to customer requirements. | ||||||||||||||
| surface | Coating, brushing, polishing, anodizing, etc. | ||||||||||||||
| length | 10mm-12000mm or according to customer's requirements. | ||||||||||||||
| Typical product | Tank car, power battery side plate, ship plate, LNG ceiling, air separation equipment tank, silo, etc. | ||||||||||||||
| Content of chemical elements (%) | |||||||||||||||
| ingredient | Fe | Si | Mn | Cr | Cu | Ti | Zn | Mg | Other individual | Other totals | more | ||||
| minimum value | - | - | 0.4 | 0.05 | - | - | - | 4 | - | - | Al: allowance | ||||
| maximum | 0.4 | 0.4 | 1 | 0.25 | 0.1 | 0.15 | 0.25 | 4.9 | 0.05 | 0.15 | Al: allowance | ||||
| comparison table | |||||||||||||||
| Japan | United States of America | International organization for standards | France | Germany | European standard | Russia | Sweden | Britain | |||||||
| JIS | UNS | ISO | NF EN/NF | DIN EN/DIN | W-Nr. | EN | Digital grade | GOST | SS | BS EN/BS | |||||
| 5082 | A95083 | AlMg4.5Mn0.7 | 5183 | AlMg4.5 AlMg4.5Mn | 3.3547 | ENAW-AlMg4.5Mn0.7 | ENAW-5083 | AMg4.5 | AlMg4.5Mn | 5083 | |||||
FAQ
