Complaint
Know-How Nke105d4 2023 new mode New energy Zero Emission 105 Ton Electric heavy duty dump truck Tipper dumper
| Basic Technical Parameters | ||||
| Vehicle Spec. | Unit | NKE90C | NKE90D4 | NKE105 Series |
| Vehicle Weight | kg | 34000 | 34000 | 39000 |
| Loading Weight | kg | 56000 | 56000 | 66000 |
| Max.Total Weight | kg | 90000 | 90000 | 105000 |
| Wheel Base | mm | 3850+1500 | 4050+1550 | 4450+1750 |
| Wheel Track(Front/Rear) | mm | 2790/2605 | 2790/2605 | 2765/2635 |
| Boundary Dimension | mm | 9050×3600×4100 | 9750*3600*4100 | 10150×3800×4150 |
| Lifting Height | Degree | 48 | 48 | 48 |
| Hopper Capacity(Rated/Heap) | m3 | 33/38 | 34/39 | 42/48 |
| Turning Radius | mm | <12000<> | <12000<> | <12000<> |
| Tyre Type | m | 14.00R25 (Tread Pattern Optional) | 14.00R25 (Tread Pattern Optional) | 16.00R25 (Tread Pattern Optional) |
| Min. Ground Clearance | mm | 380 | 380 | 420 |
| Rear Axle Ratio | 14.298 | 14.298 | 16.641 | |
| Axle Quantity | 3 | 3 | 3 | |
| Driving Type | 6*4 | 6*4 | 6*4 | |
| Axle Loading Front/Middle/Rear | t | 20+35+35 | 20+35+35 | 25+40+40 |
| Rated Power/Peak Power | Kw | 450/600 | 450/600 | 450/600 |
| Transmission Gear | 7 Gear | 7 Gear | 7 Gear | |
| Max. Gradeability | % | ≥35 | ≥35 | ≥35 |
| Max. Speed | Km/h | ≥42 | ≥42 | ≥42 |
| Front suspension | Plate Spring+Push Rod | Hydro-pneumatic Spring+Push Rod | Hydro-pneumatic Spring+Push Rod | |
| Rear Suspension | Trunnion Shaft+Plate Spring+Push Rod | Trunnion Shaft+Plate Spring+Push Rod | Trunnion Shaft+Plate Spring+Push Rod | |
| Driving Battery Capacity | Kwh | 350 | 422 | 422 |
New Energy Driving Strengths:
With the introduction of the "14th Five-Year Development Plan for Construction Machinery Industry" by the state,which strengthen the product life cycle Periodic green management, speed up the green transformation and upgrading of construction machinery enterprises. As a result, mining enterprises are under great pressure on environmental protection and high cost of operation and maintenance,anxiety about the mileage range of new energy equipment,difficulty for the government to collect carbon emission data,mining machinery and carbon emission Regulatory pain points, etc.
Aiming at its pain points, Know-How Group has a strong, independent and one-stop new energy mining equipment solution capability Power, zero emissions, maintenance-free pure electric equipment can effectively solve the traditional mine construction machinery environmental protection pressure,High fuel cost and expensive maintenance problems.
Meanwhile,through independent research and development and in-depth cooperative development,Know-How has formed a service all scenario, full working conditions of energy supplement equipment, and making full use of Know-How cutting-edge new energy charging and swapping stations technology to promote market Layout, providing the 5-8 minute quick battery replacement solution, improving vehicle efficiency, and successfully solving new energy equipment mileage range anxiety issues.
1.IP68 super protection, cast aluminum shell, greatly improve the shock resistance;
2. Up to 5000 charge and discharge cycles,up to 2.8 million degrees of discharge life, the service life is expected to be 8 years;
3. The use of air conditioning water cooling constant temperature battery management technology, temperature control 28 ~ 35ºC, keep the battery in the best working condition;
If your Transport Road condition is like Heavy duty downhill slope gradient 5%,Slope length 300 meters or more,the electric truck could work 2 -3 days within one charging owe to "electricity Recycle" function.Our electric equipments is the best solution for your mining.
Core Parts Guarantee Details:
| Guarantee Items | Guarantee Period | Notes |
| Overall Vehicle | 6 months or 30000kms | Decided by Occur First |
| Main Frame | 12 months or 60000kms | The longitudinal cracks, deformation and other faults of the frame caused by poor manufacturing and assembly will be provided with three guarantee services, which can be repaired by welding, and the frame assembly can not be replaced by welding repair.Damage caused by overload is not covered by warranty. |
| Power Battery | 60 months or 200000kms | Man-made or accidental damage is not covered by the warranty. |
| Driven Motor | 24 months or120000kms | If the fault is caused by the manufacturing quality, three guarantees service will be provided, and corresponding parts can be replaced. |
| Ser. | Item | Parameter Or Description |
| 1 | Equipment Operating Mining Site | |
| 2 | Altitude Height (m) | |
| 3 | Climatic Feature | |
| 4 | Annual Average Temperature (ºC) | |
| 5 | Extreme Temperature(ºC) | |
| 6 | Annual Precipitation | |
| 7 | Operating Road Condition | For Example: |
| Road Section 1, Heavy duty uphill slope gradient 8%, Slope length 300 meters | ||
| Road Section 2, Heavy duty downhill slope gradient 2%, Slope length 210 meters | ||
| 8 | Road Surface Condition | Smooth Gravel Road (Yes/No) Smooth Dirt Road (Yes/No) |
| Easy Sink Dirt Road (Yes/No) | ||
| Other:Offer Road Pictures | ||
| 9 | Road Max Slope Gradient(°) | |
| 10 | Transport Cargo Condition | Metallic Mine (Yes/No) |
| Latarge Cement (Yes/No) | ||
| EarthWork (Yes/No) | ||
| Coal Mining (Yes/No) | ||
| Other:Offer mining Material Pictures | ||
| 11 | Transport Material Density(t/m3) | |
| 12 | Single Transport Material Weight(t) | |
| 13 | Climbing Operate Condition(Most) | Heavy Duty Uphill (Yes/No) |
| Heavy Duty Downhill (Yes/No) | ||
| 14 | Single Transport Distance(km) | |
| 15 | Cycling time | |
| 16 | Operating Time | Operating Day Per Year: |
| Operating Day Per Month: | ||
| Shifts Every Day: | ||
| Each Shift Working Time(h): | ||
| Each Shift Circle Transport Quantity: | ||
| Each Circle Transport Cycling Time: | ||
| 17 | Current Operating Vehicle Brand & Model | |
| 18 | Current Operating Vehicle include Wide-Body Dump Truck (Yes/No) | |
| 19 | Current Fuel Equipment Fuel Consumption | |
| 20 | Local Fuel Unit Price | |
| 21 | Local Electric Unit Price | |
| 22 | Local Certification Approval or CE necessary | |
| 23 | Customer extra Concern or Requirement (e.f. Brake or Safety) |
1. WHAT ARE YOUR STRENGTHS?
(1)We have majored in the mining equipment field more than 25 years,have strong ability to research and develop main parts in the truck according to customers customized requirements,such as battery capacity,endurance mileage,gearbox function design etc,
(2)Our mining Machinerys are much popular in North America,Mid-Europe,Mid-East,Southeast Asia,South America.
(3)Our heavy duty Machinerys are new energy electric power drive,Zero polution,Zero emission,totally fulfill local market Environmental Protection policy requirements.
(4)Actually,electric power drive could save more than 90% costing than fuel or diesel machinery.
(5)We have professional after-sale service teams which could solve your trouble in timely.
2. WHICH PAYMENT METHOD CAN YOU ACCEPT?
L/C and T/T,else payment terms are also negotiable before make a deal.
3.WE WANT TO CUSTOMIZED SOME PARTS ON TRUCK TO MATCH OUR WORK SCENE,SUCH AS TIRE,POWER,AND LOADING WEIGHT.
It is indeed no problems,that is just right our strength,we could fulfill different customers customized requirements.Actually,there are some spare parts are optional.
4.WE WANT IMPORT PRODUCTS IN CKD OR SKD, IS THAT OK?
This question is also no problem,we could support CKD or SKD base on different condition claims.
5.WHAT LOGISTICS WAYS YOU CAN WORK FOR SHIPMENT?
We could ship the equipment by various transportation tools,
(1) Our main shipment methods are by roll on & roll off or bulk shipment.
(2) For Inland neighborhood countries arround China,we could send machinery by road or railway.
(3) For spare parts or easy broke parts,we could send by globle express,such as UPS,DHL,TNT or Fedex.
6.WHAT IS YOUR AFTER-SALES TERMS?
(1) One-year quality guarantee or within 10000kms (depend on occur first) for overall vehicle,key main parts such as motor,battery have different guarantee period,5 years,you could inquire the sale for details guarantee items and period.
(2) Other spare parts could be supplied by OEM at cost prices.
(3) Provide spare parts for the easy-to-break parts.
(4) The overseas engineers will come change spare parts and maintenance.
