Complaint
DC motor CONTROLLER is a kind of speed CONTROL product developed and produced by adopting past successful experience and combining modern advanced technology. This series of products have met international standard requirements and are sold to many countries. This driver adopts thyristor chopping control principle and uses independent trigger mode. Even there is no velocity feedback, high speed ratio can be achieved to make it more accurate and reliable.
Excellent performance, reliable quality and high cost performance make it a strong performer in DC motor driver field and it was widely used in plastic machinery, food machinery, cable equipment, machining, paper printing, testing equipment, laboratory equipment and mixing equipment, etc.
| SMT technology, small size |
| Good following features, rapid respond speed |
| Wide speed ratio, strong mechanical features |
| Applicable to permanent magnet ,separate excitation type and DC torque motor |
| Current setting and current-limiting protection (continuous operation setting current) |
| Large low speed output moment |
| Over-current protection function |
| Soft start, soft stop setting function |
| Selection of speed mode, torque mode |
| Normally open, close selection of enable signal |
| Selection of input, output voltage switch |
| Driver speed governing controlled by standard signal input 0-5V or 10K potentiometer |
| input voltage AC | 110V/220V±10% |
| output voltage | DC: 0~90V 0-110V 0-160V 0-180V 0-220V (can be set) |
| rated output current | 35A |
| speed ratio | 80:1 |
| output voltage accuracy | ≤0.1% |
| soft starting time | 0.2S-20S |
| soft stopping time | 0.2S-10S |
