Complaint
Dante Wall speaker with DSP, POE power supply 90W Lavoce Italy driver 6.5 inch
Product number: 523033
This Speaker can realize its multifunction the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. DP 90 DSP adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality realizes on this compact speaker of low power design.
Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. DP 90 DSP integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control. All these functions can perform remotely on the PC by DSP Controller Software.
Features
| Type | Subwoofer speaker with DSP and Dante |
| Input Interface | RJ-45 |
| Audio Input Signal | Dante™ | Balanced amplified signal |
| Cable | Cat-5 or above |
| Output Power | 90W, POE boost up to 60W depends on router power |
| Bandwidth | 100M/1000M bps |
| Frequency Range | 70Hz-18KHz(±3dB) |
| Driver | Lavoce Italy driver 6.5 inch coaxial |
| Sensitivity | 91dB (1w/1m) |
| Max. SPL | 117dB(continuous) |
| Total Harmonic Distortion | <0.30% |
| Signal to Noise Ratio | >100dB |
| Noise Floor | <200uV |
| System Efficiency | >70% |
| Protective Circuitry | Over-current protection, Thermal protection, Overload protection. |
| Cooler | Natural convection cooling |
| Dimension | (Height)305 x (Width)245 x (Depth)235mm |
| Package | (Height)369 x (Width)581 x (Depth)296mm |
| Net Weight | 6kg |
