Index Properties | Test Method | Unit | GG1515 | GG2020 | GG2525 | GG3030 | GG4040 | GG4545 | GG5050G | |||||||||
MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | |||||
Polymer | - | - | PP | - | PP | - | PP | - | PP | - | PP | - | PP | - | PP | - | ||
Minimum Carbon Black | ASTM D 4218 | % | 2 | - | 2 | - | 2 | - | 2 | - | 2 | - | 2 | - | 2 | - | ||
Tensile Strength @ 2% Strain | ASTM D 6637 | kN/m | 5 | 5 | 7 | 7 | 9 | 9 | 10.5 | 10.5 | 14 | 14 | 16 | 16 | 17.5 | 17.5 | ||
Tensile Strength @ 5% Strain | ASTM D 6637 | kN/m | 10.5 | 10.5 | 14 | 14 | 17 | 17 | 21 | 21 | 28 | 28 | 32 | 32 | 35 | 35 | ||
Ultimate Tensile Strength | ASTM D 6637 | kN/m | 15 | 15 | 20 | 20 | 25 | 25 | 30 | 30 | 40 | 40 | 45 | 45 | 50 | 50 | ||
Strain @ Ultimate Strength | ASTM D 6637 | % | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | ||
Structural Integrity | ||||||||||||||||||
Junction Effciency | GRI GG2 | % | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | ||
Flexural Rigidity | ASTM D 7748 | mg-cm | 250,000 | - | 750,000 | - | 1,000,000 | - | 2,000,000 | - | 4,800,000 | - | 6,000,000 | - | 8,000,000 | - | ||
Aperture Stability | COE Method | m-N/deg | 0.32 | - | 0.50 | - | 0.65 | - | 0.75 | - | 0.98 | - | 1.05 | - | 1.10 | - | ||
Dimensions | ||||||||||||||||||
Roll Width | - | m | 3.95 or 5.95 | 3.95 | ||||||||||||||
Roll Length | - | m | 75 | 50 | ||||||||||||||
Note: MD = Machine Direction; TD = Transverse Direction. |