Prefab Industrial Metal Structural Steel Frame Storage Construction Warehouse

Min.Order: 200
Product origin: Qingdao, Shandong, China
Infringement complaint: complaintComplaint
US$ 29.99 ~ 34.99

Description

The sizes can be customized according to requirement.
Usage: Warehouse,Workshop,Shed,Hangar,Store,Office.
After-sales Service: 
Online installation guide or dispatched engineer.
Advantages of steel structure:
1.Steel structure is high strength, meanwhile it is very light;
Steel has higher strength and elastic modulus. Compared with traditional concrete and wood, the ratio of density to yield strength is relatively low. Therefore, under the same stress condition, the members of steel structure will be small in section, light in weight, easy to transport and install, and suitable for structures with large span, high height and heavy bearing capacity as steel structure workshop.
2.Steel structure has well toughness & good plasticity. It is uniform material with high structural reliability. It is suitable to bear impact and dynamic load and has good seismic performance. The internal structure of steel is homogeneous and nearly isotropic. The actual performance of steel structure accords with the calculation theory. So the steel structure has high reliability.
3.High degree of mechanization in steel structure manufacturing and installation Steel structure members are easy to assemble in factory and on site. Steel structure members manufactured by factory mechanization will be have high precision, high production efficiency, fast assembly speed and short construction period. Steel structure is one of the most industrialized structures. So it is more popular as steel structure workshop.
4.Low carbon, energy saving, green environmental protection, reusable Demolition of steel structures workshop will produce almost no construction waste, steel can be recycled.

 

STEEL STRUCTURE MEMBERS PRODUCTION (Fabrication) PROCESS :

1. Prepair raw materials : cut steel plate or use internation size H section steel and angle steel,round tube,round steel,square tube etc.;
2. Assembly and welding: our welders will follow the drawings to assembe the steel members and weld them together as a entire beam/column/brace and so on; (Our quality inspector will check the steel pieces after finish welding,this is the first quality check)
3. Sand blast : After finish welding and polishiing,our sand blast effect can reach internation 2.5 high grade,very good for resist rust; (Secondary quality check)
4.Paint : Within 2 hours after sand blast,all the steel members should be paint. Client can choose any color and any brand of paint. (The third quality check)
5. Inspect the goods by client : After we finish a part of fabrication work,we will invite clients to check the goods before we pack the steel frame.
6.Packing and loading : If clients require us to load the goods by close containers,we will pack the steel structure members one by one on the steel skid and tie the whole steel package well. (The fourth quality check )


Our steel structure building is flexible layout, lowfoudation cost and can designed as per buyer's requirement.

Please supply us the following parameter,If you need we design for you!

1Location:(where will be built? )             Country             ,City             , if nearby sea         
2Dimension:length*width*height                        m*            m*            m
3Wind load ( max. wind speed)?              km/h
4Snow load (max. snow height)?                       kn/m2,              mm, temperature range          
5Anti-earthquake level ?  
6Usage of the building? 
7Doors and windowsDimension              ,quantity              ,position                        
8Brickwall needed?Needed or No?  Height                                   
9Roof panel and wall panel?(You could choose sandwich panel, EPS, fiberglass wool, rockwool, PU sandwich, and you also could choose corrugated steel sheet and glass wool installed together on site  either)                         Panel type                                                                        
Sandwich materials                           
                        Sandwich thickness                                                       
10Crane needed or not, if yes               Units, max. Lifting weight          tons,max.Lifting height           m.
Q.You are manufacture factory or trading company? 
A.We are manufacture factory. And you are welcomed to visit our factory at any time. The quality control flow and sales team will show you our professionalism. Also you will can get best and most competitive price after visiting us. 

Q. Is your price competitive compared with other companies? 
A.Our business objectives are to give the best price with same quality and best quality with the same price. We will do everything we can to reduce your cost and guarantee you get the best product that you paid for. 

Q. Can you send engineers or whole team to install my project? 
A.We will give detailed installation drawings and video for free. We could dispatch installation engineers as installation director or a team upon request. 

Q. Do you accept container loading inspection? 
A.You are welcomed to send an inspector, not only for the container loading, but any time during the production time. Our can SGS and BV checking report. 

Q. Do you offer designing service for us? 
A.Yes, we could design full solution drawings as your requirements. By using AutoCAD, PKPM, MTS, 3D3S, Tarch, Tekla Structures (Xsteel) and etc. We can design complex industrial building like office mansion, super marker, auto dealer shop, shipping mall, 5 star hotel. 

Q. What is the delivery time? 
A.Delivery time depends on order quantities. In general the delivery time to nearest seaport in China will be 30 days after receiving deposit. 

Q. How can you get a quotation for your projects? 
A.You can contact us by email, phone,  Wechat, WhatsApp, Skype, Viber and so on 24*7 and you will get reply within 4 hours. 
Product Tag:
Related categories:
Scroll to Top