Categories

Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A
Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A
Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A
Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A
Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A
Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A

Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A

Min.Order: 1
Product origin: Wenzhou, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 48.99 ~ 89.37

Description

Product Description
High-voltage current-limiting fuse is one of the main protection components of electrical equipment, and is widely used in 35KV substation equipment. When the power system fails or encounters bad weather, the generated fault current increases, and the high-voltage current- limiting fuse plays an important protective role as a protector for power equipment.
The improved fuse cover is made of high-strength aluminum alloy material, and the imported sealing ring is used for waterproofing. The fast and convenient spring is used to press the hair, and the end is pressurized to make the diversion and waterproof performance better than the old fuse.



Model Description



Product technical parameters 




Product features and scope of use
1. The fuse has a reasonable design and is easy to operate. It does not need to disassemble any connecting parts. One person can open the end cover to complete the replacement of the fuse tube.
2. The end head is made of high-strength aluminum alloy material, which will not rust even if it runs outdoors for a long time, and has a long service life.
3. The 35KV high-voltage fuse in the substation can be fused to reduce the risk of replacing the fuse pipe.
4. Suitable for short circuit and overload protection of transmission lines and power transformers.
5. It is suitable for use below 1000 meters above sea level, and the ambient temperature is not higher than 40 ºC, not lower than -40 ºC.



Product structure description and installation precautions
The fuse consists of a melt tube, a porcelain sleeve, a fastening flange, a rod-shaped post insulator and a terminal cap. The terminal caps and melt tubes at both ends are fixed in the porcelain sleeve by means of press fitting, and then the porcelain sleeve is fixed on the rod-shaped post insulator with the fastening flange. The melt tube uses raw materials containing high silicon oxide as the arc extinguishing medium, and uses a small diameter metal wire as the fuse. When the overload current or short-circuit current passes through the melt tube, the fuse is blown immediately, and the arc occurs in several parallel narrow slits. The metal vapor in the arc penetrates into the sand and is strongly dissociated, which quickly extinguishes the arc. Therefore, this fuse has good performance and large breaking capacity.
Installation Precautions:
1. The fuse can be installed horizontally or vertically.
2. When the data of the melt tube is inconsistent with the operating voltage and rated current of the line, it shall not be connected to the line for use.
3. After the melt tube is blown, the user can disassemble the wiring cap and replace the melt tube with the same specifications and performance requirements.



Product details


Products real shot



A corner of the production workshop


Product packaging



Product application case
 
Related products
Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A
Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A
US$ 48.99 ~ 89.37
High Voltage Polymer Composite Insulators for High Voltage Transmission Lines
High Voltage Polymer Composite Insulators for High Voltage Transmission Lines
US$ 3.3 ~ 3.5
High Voltage Cable Overhead Bare Wire Aluminum Conductor ACSR for Power Transmission Lines
High Voltage Cable Overhead Bare Wire Aluminum Conductor ACSR for Power Transmission Lines
US$ 0.15 ~ 8
DC Low Voltage Stepper Driver for Transmission Power Lines
DC Low Voltage Stepper Driver for Transmission Power Lines
US$ 27 ~ 33
High Voltage Power Transmission Insulators
High Voltage Power Transmission Insulators
US$ 1 ~ 20
10-35kv Low-Loss Epoxy Resin Pouring Dry-Type Power Voltage Transformer for Power Transmission
10-35kv Low-Loss Epoxy Resin Pouring Dry-Type Power Voltage Transformer for Power Transmission
US$ -1
Jls-35kv/100V 5-300A 30/50va 10/20va Outdoor Oil-Immersed Combined Instrument Transformer High Voltage Power Metering Box
Jls-35kv/100V 5-300A 30/50va 10/20va Outdoor Oil-Immersed Combined Instrument Transformer High Voltage Power Metering Box
US$ 75.3 ~ 150.69
Xhhv Series Factory Price 35kv DC High Voltage Power Supply
Xhhv Series Factory Price 35kv DC High Voltage Power Supply
US$ 1000 ~ 3000
Customers Also viewed
35kv Power Cable High Voltage Tester AC Resonance Test Set
35kv Power Cable High Voltage Tester AC Resonance Test Set
US$ 2990 ~ 7200
High Voltage Power Transmission Polymeric Insulator
High Voltage Power Transmission Polymeric Insulator
US$ 2 ~ 12
Wireless High Voltage Phase Detector for High Voltage Power Transmission Line
Wireless High Voltage Phase Detector for High Voltage Power Transmission Line
US$ 580 ~ 1200
Ceeg Three Phase 6300 kVA/35kv Oil Immersed Power Transmission/Distribution Voltage Transformer
Ceeg Three Phase 6300 kVA/35kv Oil Immersed Power Transmission/Distribution Voltage Transformer
US$ 7678.82
SVR 6-35kv 630-20000kVA Outdoor Three-Phase High Voltage Line Feed Automatic Voltage Regulator
SVR 6-35kv 630-20000kVA Outdoor Three-Phase High Voltage Line Feed Automatic Voltage Regulator
US$ 9000 ~ 19000
Product Tag:
Related categories:
Scroll to Top