Description
Double exchange rotary table, Save labor cost, High efficiency
TH-63S is equipped with double-exchange rotary table, which can realize workpiece loading and unloading on the outer table during machining, so that clamping and machining can be carried out simultaneously, reducing non-machining time and improving machine operation rate.
It has obvious advantages for machining parts with short processing time and frequent clamping, and greatly improves equipment utilization.
Processing examples:
X/Y/Z-axis travel: 1050×750×900 mm
X/Y/Z-axis rapid traverse:24/24/24 m/min
Worktable area: 630×630 mm
Spindle speed:6000 rpm
+Double exchange rotary table, high stability of operation, improve processing efficiency.
+Taiwan high precision spindle, standard speed 6000rpm, with spindle air curtain protection, stable precision and long life.
+Adopt high power constant torque motor.
+High rigidity roller guide structure, both the heavy cutting rigidity of hard rail and the fast moving characteristics of linear guide. +Screw double support pre-stretching, eliminating transmission backlash and pre-compensating the error caused by temperature rise.
+Precision rotary table, ultra-high positioning and repeat positioning accuracy to ensure workpiece processing accuracy.Size specification:
| Machine type | Unit | TH-63S |
| Stroke | | |
| Table X-axis travel | mm | 1050 |
| Table Y-axis travel | mm | 750 |
| Table Z-axis travel | mm | 900 |
| Spindle | | |
| Spindle speed | rpm | 6000 |
| Spindle taper | - | 7/24 taper.50 |
| Spindle motor | kw | 15/18.5 |
| Worktable | | |
| Number of tables | | 2 |
| Table indexing | | 1° /0.0010 |
| Distance from spindle end to table center | mm | 130-1030 |
| Distance from spindle center to table surface | mm | 0-750 |
| Table area | mm | 630x630 |
| Maximum table load | kg | 1000 |
| Maximum swing diameter | mm | 950 |
| T-slot (number of slots x slot width x spacing) | mm | 5 x 22 x 125 |
| Displacement | | |
| X-axis rapid displacement | m/min | 24 |
| Ya-axis rapid displacement | m/min | 24 |
| Z-axis rapid displacement | m/min | 24 |
| Cutting feed speed | mm/min | 10-10000 |
| Tool magazine | | |
| Tool change type | type | Knife arm type |
| Tool shank type | type | BT-50 |
| Tool puller type | type | P-50 (45° ) |
| Tool magazine capacity (optional) | pcs. | 30T(40T/60T) |
| Max. tool diameter (no neighboring tool) | mm | 112 (200) |
| Max. tool length | mm | 350 |
| Max. tool weight (optional) | kg | 18 ( 25 ) |
| Others | | |
| Controller | | OI-MF |
| | | |
| Floor space (L X W) | mm | 6600x4300 |
| Machine height | mm | 2900 |
| Machine weight | T | 14 (Floating difference 5% ) |
| Power requirement | KVA | 35 |
| Air pressure source | kg/cm2 | 6 |
Standard configuration:Fanuc 01-MF machine
Automatic lubrication system
Ground bolts and spacers
Tool box
Working light
Three-color warning light
Electrical box heat exchanger
Transformer
Machine table air gun
Fully enclosed outer protection cover
chip conveyor and chip storage cart
Mobile hand wheel
Cooling pump
Robotic tool magazine
Hydraulic station
Foot switch
Optional Accessories:10000/12000rpm direct knotted spindle
3-axis scale
Fifth axis rotary table
spindle center water outlet
Automatic tool length measuring system
Workpiece measuring system
Oil and water separation system
Oil mist collection and separation system
Mitsubishi/Siemens/Guandu/Kainty system
Automatic safety gate system
Complaint
