Pearl/Metallic Beige/Grey Color Ral1035 Powder Coating Supplier for Powder Paint

Contact Information

Ms. Summer Yang | Sales Manager

Jinhu Color Powder Coating Co., Ltd.

Room 3-3102 | No.56 Lingzhi Road | Xinghe World | Nanjing 210028 | China

 

 


Pearl/Metallic Beige/Grey Color Ral1035 Powder Coating Manufacturer

Paint by:
Electrostatic spray gun & curing oven.

POWDERS
Chemistry: Epoxy
Particle size: Suitable for electrostatic spray
Storage: Dry ventilation conditions below 30ºC
Curing schedule:180ºC/15minutes
Specific gravity: 1.2-1,8g/cm3 up to colors

Coating Film Spec.

Test Item	Test standard and Method		Test index
Impact resistance	GB/T 1732 -1993	ISO6272	50kg·cm
Adhension(cross-cut)	GB/T 9286 - 1998	ISO2409	Class 0
Flexibility	GB/T 6742-1986	ISO1519	2mm
Pencil hardness	GB/T 6739-1996	ISO2815	1H-2H
Cupping test	GB/T 9753-1988	ISO1520	6mm
Salt spray resistance	GB/T 1771-1991	ISO7253	>400 Hours
Heat & humidity resistance	GB/T 1740-1979	ISO6270	>500 Hours,film gloss slightly lose
Note: 1. Above test are using 0.30mm thickness degreased, rust removed cold rolling steel plate, film thickness is 60-80um. 2. Film performance may slightly decrease with gloss decrease.

Basic information:
This is powder coating based on epoxy resin with outstanding chemical,
mechanical and corrosion resistance properties. These characteristics, together with its FDA compliance,
make it suitable as a non-toxic, protective coating in many indoor applications ,including tap ware,
bathroom fittings, water-tanks, drum linings etc.

Raw material:
Pure Epoxy powder coating contains pure epoxy resins and other little addtives

STORAGE                                                                    
1.Under dry conditions,good ventilation at a temperature not exceeding 30 C,humidity<60%
2.Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
3.Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
4.Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.