Heating efficiency | <5 seconds /100°C |
Defective rate of forming | <1% |
single time to complete forming | ≤15 seconds |
Controllable forming pressure range | 1-10 Bar |
Controllable forming temperature range | 150° C -400° C , the foil was heated evenly |
Voltage | 220V |
Heating Power | 50-500w( adjustable ) |
Outer Diameter | 100-400 MM |
Core Diameter | 70MM |
Dehumidification Temperature | 5-45 ºC |
Width | 120-160 MM ( Size customization is available ) |
Heating Moudle
Import short wave near infrared heating tube : single power :120W
Multiple light tubes are arranged evenly to ensure uniform temperature in the heating area .
The positive and negative pressure forming system can ensure the forming accuracy on the premise of meeting the mold size and foil forming width requirements .
Molding pressure holding :0.2-0.7 MPA adjustable
Molding negative pressure :0-101 KPA adjustable
Trimming Moudle Trimming Tool : Die Steel 50-60 HRC
Convey Moudle Servo System
The thermoforming machine takes the foil roll as the raw material, and through hot forming and compression, the membrane is perfectly pressed on the dental mold, with high fitting rate and high efficiency. After pressing, it automatically cuts off, and transfers the model of single pressed membrane to the next stage.