Agricultural spare parts include breaker shield and main shield. Depending on your equipment type, there may be multiple parts on a farm implement. Check the main shield for wear and ensure that the stickers and guards are intact. If you do not see any protective devices or shields on the agricultural machinery, consider replacing them. If the shield is broken or damaged, check the Tractor Manual for special maintenance instructions for replacing the shield. Main guard on rear PTO shaft Unlike the front PTO guard, the main guard on the rear PTO rotates up and down on the rear PTO. This allows access to PTO shaft 14, but prevents damage to the center door. PTO body 20 turns around pivot pin 26. In addition to the main guard, several other parts of the PTO may be damaged. The main shield is supported on the rear power take-off shaft of the agricultural vehicle using a three-point hitch. The door and body openings are dimensioned and positioned so that the centre link of the hitch can engage them. The main guard can be moved up and down between its lowered and raised positions by means of spring-loaded locking devices. The locking device also includes a pivot link member located on the PTO shaft that allows the main guard to be moved from the raised position to the lowered position. Check for wear If you own a farm, you should spend some time checking the agricultural spare parts on the equipment before the harvest season. Wear of the equipment will cause damage to the motor, loose fasteners, connecting rods and bushings. Tyres and wheel bearings should also be checked for corrosion. Also check the strength and corrosion of the battery. The right tools can help you avoid any disaster during the harvest season. Regular maintenance is essential to maintain efficient operation of agricultural machinery. If dirt accumulates in the part, there is a small leak. Such small leaks can usually be repaired by tightening the hose, replacing the clamp, and checking the drain plug. Over time, any type of agricultural machinery will gradually lose liquid, but if this is a serious problem, it is time to seek maintenance. A good way to determine when equipment needs to be replaced is to perform a visual inspection.
Complaint
